308 models
Update 22.03.2025 The files have been updated to simplify assembly, especially when connecting the parts using filament. Additionally, the left and right top parts can now be joined with an double hinge, allowing the board to fold…
Print approx. €1.59–€1.95 excl. taxPreliminary estimate for PETGSource material: PET
I needed this remix for my wife :) She hated cable position being clipped without a chance to move (as it is tighten in the original from Ben G. [thanks for the design!]) So here: the cable is going inside, where the t-shirt is being…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Smartphones put power in the hands of everyday people to hold awful behavior to account, but holding up a phone makes you a target. This print lets you use your phone as a body camera, and attaches to a shirt, lanyard or backpack. Add an…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
Mickey Mouse shirt button! Add some Disney flair to your shirt that needs a new button. Printed with color changes and 0.4mm nozzle. If you can, I would recommend printing with a 0.25mm nozzle to get better detail/quality since the button…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
mickey mouse shape button, size 14.11x12.09x2mm
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Hello like everyone else I regularly lose these small essential parts which ensure my shirts' collar remaining in the correct place. I've designed theses collar sticks/stays in 3 standard lengths with a 1mm thickness : 50mm /1.96 inch…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
I tried to make this button as small as a real dress shirt button, and it's close - 15mm in diameter. To discern the detail it must be printed at ultra high 0.05mm resolution. I used 100% infill. Fortunately, it's so small it only takes…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
Hey, as I was walking around, I've got astonishing idea to recreate T-Shirt idea from movie Forrest Gump as a 3D printed double colored object! In 3MF file there is everything prepared for Prusa Slicer to slice it. You just need to change…
Print approx. €2.28–€2.78 excl. taxPreliminary estimate for one variant
Seems to make my prints better when I wear it
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
shirt collar stay for Jeff Banks shirts (which seems to be narrower than standard)
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
The insert uses 10mm circular magnets (3mm width if anyone is wondering); however, if anyone wants me to adjust the magnet holes feel free to let me know the size and I'll upload a new file with the given size. The model is designed using…
Print approx. €5.96–€7.28 excl. taxPreliminary estimate for one variant
a small button from mario bros in pixel style, size 11x14x2.5mm
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
Lego shirt. g-code vs. includes filament change at 3rd z layer. Use it to pause and place your tule atop the layer. Heres a video showing how to attach the print to the T-shirt. https://youtu.be/x4EiUu33GbM Lego design modeled here: Use…
Print approx. €5.20–€6.35 excl. taxPreliminary estimate for one variant
Funny Otto Shirt Button size 13.7x14.5x2.5mm, im added big button x2 size with more detail., but you can scale it to adjust to your clothe. Thanks!
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Your next wedding or black tie event is saved. Print one or the whole set of these tuxedo shirt pins I designed.
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
Magnets required to tension the Tshirt! Use tape to cover purgeline or disable in the print settings. On the pictures are my first testprints of an .svg of the hubble*. I put the metal print sheet INSIDE the Tshirt → only 1 fabric layer…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
Triko pro přišití knoflíků.
Print approx. €3.94–€4.82 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement part for a broken bottom part of a shirt hanger, similar to the Hangaway shirt hangers with three arms and legs. Print instructions Printed in PLA at 0.2mm layer hight.
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to make a simple and high quality CNC drawing machine to draw on almost anything. I'll step you through how to build your own…
Thank you for downloads, likes… Enjoy !
3D Printed Shirt V2 After seeing various designs for 3D printed fabric panels over the last few years, I decided to try my hand at printing a shirt after receiving a new Prusa MK4 printer. The ability to print a perfectly consistent first…
Print the insert with PETG, glue magnets to it and follow instructions in the article about printing on T-shirts. Article: https://blog.prusaprinters.org/ how-to-print-on-t-shirts_55588 / Video:
This is a set of prints used for an article about 3D printing on t-shirts. Read the article to find out more. Article: https://blog.prusaprinters.org/ how-to-print-on-t-shirts_55588 / Video:
I designed this housing for the Prusa radial fan to control the distribution of its airflow and enable it to be used as a portable fan. I added a clip so that I can carry it on my pocket and direct the airflow into my shirt. The clip can…
A set of rulers for centering out your graphic designs on t-shirts. You can print one color the first 0.6 and change color after that to make the lettering and numbers more visible. Additionally, you could use your Cricut or similar…
A decorative and functional T-shirt shaped pen holder, inspired by a stylish V-neck top. This model is designed as a small bust-style desk organizer with short sleeves, subtle fabric folds and an embossed logo-style detail on the front.…
The clip is designed to keep headphone/earbud wires planted to your shirt which is useful for running or other activities. Designed this particularly for running since the bouncing of the wires was really distracting. The clip can be…
Just re-uploaded this model on Printables for users to find it easily. I love the design. First layer height 0.14 0.2 layer height top solid layers 4 bottom solid layers 4 10% infill (grid) No Supports All credits go to: Tdire (please…
Here is a Minnie or Mickey Mouse Shirt Slide, perfect for your next trip to Disneyland. The bow should click on nicely but you may want to add a dot of super glue for extra hold. Designed in Fusion 360.
Add personality to your workspace with this stylish 3D printed pen holder shaped like a shirt, tie and belt. It’s elegant, fun, and perfect for desks, studios, offices and home-office setups. A unique conversation starter and a great gift…
Support your favourite team with a nice keychain! Print it with multimaterial or by layer to obtain a nice final color effect! You can find the .3mf files ready for multimaterial printing, just choose your favourite spools of colors.…
Nozzle: 0,4 Supports: NO PLA, PETG I will be happy if you publish your printed model :)
The original Røde lavalier clip is made for shirts, to clip horizontally. I normally wear this mic with t-shirts (mounts vertically) and I needed a solution to hang it properly and hide the cable. This model could work with many other…
3D Shirt V0.9 After publishing my 3D PrintedShirt V2 I received several requests from people wanting something that would print on a MK4 (or similar sized printer). I explained that I learned several things with V0.9 and that it required…
Made a quick little four leafed clover shirt pin. It is designed to fit a paperclip into the back as seen in photo to attach to a shirt collar, hat belt, or anything else you'd like.
Tool to help sizing and placement for designing new or bought iron on T-shirt transfers. Measures are in metric cm. I added a colour change for the markings to make them more visible. Rafts: No Supports: No Infill: 20% Filament material:…
Made the base shape from :Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d) The beads pictured are at 70 percent scale! so if printed at 100 percent they will be larger 70 percent size is probably the…
This is a set of pieces that can be used to recreate the Jawa - Tattered Shirt figure at 500% scale. This figure was introduced in 2018 and appeared in 4 sets between 2018 - 2021. All of the stl files needed to create this have been…
T-shirt print model featuring a Nissan GTR Liberty Walk. With this model you can create your own custom T-shirt print that will be durable. The print can be made using TPU or PLA . Instructions Print the model using the settings provided…
A shirt shaped keychain If you open the stl file in bambu slicer, you will find 2 text objects you can paint and change the number/name It requires support for the sleeves
This is the perfect tool to help you fold your shirts Better, Faster and more Efficiently! Although this print takes a while to complete, make sure that your filament flow and printer are well calibrated, as I designed the model to have…
This is the "magic yellow box" from Qidi Q2 promos for printing on fabric. It's adapted for printing on Q2 (original model was made for printing on qidi plus4). This is V1. Qidi Q1 Pro bed is required (245x245), 4 rectangle magnets…
A remix of the excellent t-shirt spacer. This version can be printed faster, cheaper and without supports. Follow the same directions as the original! Check out How to Create your Own T-shirt Motif with a 3D printer? - Prusa Printers for…
The 80s wants their shirt clip back! My daughter was bunching up the side of her shirt like girls did in the 80s, so I quickly tossed this design together and sent it to the printer. Print instructions I recommend 0.2 resolution and 4…
Enhances and maintains the shape of a perfect shirt collar by providing support that prevents shirt collar drooping, sagging and folding of the collar and plackets under the weight of a jacket. resize as needed , Print with brim.
A 2 part back plate for a manokit/ shark fin/ wing design to wear with a shirt. The plate with the straps works like a backpack and goes under the shirt, the part that has the fin attached goes over the shirt and slides into the channel.…
Overview This remix is of the awesome Clothes Folding Board / Shirt Folding Board . I split the panels up to fit onto a 220x220x220 print bed. The bottom panels are split in half with dovetail joints and top panels were split into four…
A small decoration for your Crocs, shoes, or shirt.
The clip that comes with the Boya M1 is perpendicular - ideal for zippers, button-up shirts, ties, etc but I'm often in a t-shirt. You can loosen and twist the included clip but it's a bit unstable in its other orientation. This clips…
If you like this model, feel free to tip me at https://ko-fi.com/kcthechemist. If not no worries and enjoy! HTV Tool for precisely placing heat-transfer-vinyl onto shirts. Check out my bigger paid-but-affordable models at…
These are 16 ligne buttons, the same size used for men's shirts. They are 10.16mm in diameter and have holes sized for sewing. Corners are nicely rounded, and the inside of the button is concave on the front. Possibly useful during a…
I cant remember where I first seen this Fun Maker play on the "Just Do It" slogan, reimagined as "JUST PRINT IT." I wanted to re-create this in a digital format to remix on to models/t-shirts etc the SVG was created in InkScape (trying to…
Collar stays for shirt collars. Shirt sizes vary so you may need to adjust the length in the step file.
These are models of all the buttons I was able to find at home plus two of my design. All designs have both 2 and 4 holes. If you like the collection or you need a model of a specific button, let me know! Print this slowly, with no…
Hate doing that top button when you wear a tie? Need extra breathing room? This thing's for you. I printed mine in white PLA and it's comfortable, undetectable under a tie and works perfectly. Hook the loop on the top button before…
T-shirt print model featuring a Porsche 911. With this model you can create your own custom T-shirt print that will be durable. The print can be made using TPU or PLA . Instructions Print the model using the settings provided in the file.…
Print Instructions: filament: PET, PLA, ASA should work: infill: 100%;
Clip that T-shirt thats a little long! The ring will slide onto the shirt and keep it up or tight when you don't want it hanging. Can be used as scarf slide, or to hold a wrap in place, or you can relive the old days and clip that shirt…
This is a double ring that allows you to cinch up a t-shirt that is a bit too big. Works great for little kids and school shirts. Print them in all the colors so that you have a variety. Print instructions Standard settings should work…
T shirt ruler for vinyl transfert
T-shirt print model featuring a Lamborghini Aventador. With this model you can create your own custom T-shirt print that will be durable. The print can be made using TPU or PLA . Instructions Print the model using the settings provided in…
Red Shirt Earrings - Remember Everyone Deployed R.E.D. Not all filaments are made the same. I use Bambu and or matte filaments mostly because I can print thinner layers and achieve the best color results. Layered. No…
chainmail shirt for toy action figures. Print without supports. scale up if you like.
Wanted to make better use of the vertical space in my closet. I've seen little clotheshanger clips before, but wanted to make something a little more fun.
Shirt button/classic button I made for my wife. She actually used it for a fox she was making out of yarn, and needed some larger button holes for the eyes. So here is my first design on thingiverse. The button has 4 holes each at 3mm.…
I was thinking about something to make for the Beads contest and had never really considered making or wearing sweatshirt string accessories before, but it seemed like fun. When I thought about designs I've done in the past, I thought…
All the models must be one layer high (usually 0.2mm). I currently don't know how to share profiles for filament and print settings, if you know how to do it, please let me know. What you will need Flexible filament (more flexible is…
Für den Leap Motion ein Shirt Clip. ich nutze es für handtracking mit den programm vseeface.
The Shirt Vase is a charming 3D-printed piece that brings personality and warmth into any space. Designed to look like a soft, buttoned-up shirt with an adorable collar, this vase stands out with its playful yet minimal style. It’s…
Layer heights 0.20, width 0.45 Category: Fashion
A Shirt collar reinforcement suitable for collars with a Dimension of 10mm x 60mm. Its 0,75mm high so use 0,25mm Layer Height. Normal Stiffer are 0,5mm thick, i made them a bit thicker so they are more reliable. German: Eine…
Create your own customized nametag. The model provided is blank and ready for your name and/or logo in your favorite font. You can customize this in several ways. You can use: The Fusion 360 3FD model and emboss your name. The STEP or STL…
Pretty simple pins, the small cylinder with the cut slot is for the safety pin. The safety pin goes into the slot and the Cylinder is then pushed into the pack of the pin. It prints for me as a pretty tight tolerance. you very likely will…
Another Collar Stay, a little extra thickness and a nice angle that is to the point. Category: Accessories
Print at 0.16 layer height or less, 30%rectilinear infill , turn on Ironing for all top surfaces for best results. Can be printed in multicolor.
Want a specific name in the model? message me I just added a little hole to use it as a keychain.
print with no supports, and make sure that the NOTCH IS FACING UP. (you will have to use supports otherwise).
Minimalist take on the classic quote. Printing 0.10mm PLA (important!) scale z-axis to ensure only one layer is printed (25% worked for me) Infill: N/A Monotonic lines Ironing Instructions Carefully remove each part of the print and place…
Unleash bold artistic expression with this captivating female figure 3D print that commands attention in any space. This detailed STL model showcases a confident pose with dynamic action, featuring clean lines and smooth curves perfect…
You are getting ready for that formal occasion and your shirt has one of those small top buttons and it just won't close without choking you. Easy button to the rescue. Slip the button through the loop, and then button the top with the…
A simple shirt clip to safe keep face masks whenever they are not needed.
"Huzzah! Adventure awaits! Dare you challenge me to a battle of brawn? My physique is unparalleled!" Bounding into battle, this muscular hero will perform suitably the role of fighter, barbarian, bard, or even an exceptionally fit wizard…
This 3D printable model features a woman dressed in a shirt and panties. Expertly sliced for straightforward printing and including a base, this figure is detailed and ready for display. All models, files, molds, and any items created…
I've designed this clip to get rid of falling earphones, IEMs, etc because of heavy cables. You can clip the cable of your in-ear monitor to the back of your shirt's neck and enjoy your music. Clip length: 40mm, width: 12mm Cable splitter…
Just a shirt button I needed and wanted to share.
Standard Shirt button. Print in whatever color you need. I have included a build plate of a dozen so in one print you have what you need for your shirt or blouse. seven for the front, one for each sleeve, two for the button down collar,…
If your dry cleaners don't use a little plastic collar support to keep your shirt collar spreads nice and like new, you can print your own at home in a matter of minutes. These supports go on while the shirt is on the hangar. The model…
This model is designed to keep the collar on your shirt straight while hanging in your cabinet or where ever you keep yours. Its a simple model that I designed because I just like my collars looking straight at any given moment.
These are simple shirt stiffeners Print Option: Bambu Lab PLA 15% Infill If you have any questions, feel free to ask.
Add striking realism to your collection with this Realistic Tattooed Male Figure , a highly detailed modern character sculpt designed for lifelike display and contemporary dioramas. Featuring a muscular, anatomically accurate physique,…
Most dress shirts need to be tailored, or are more expensive to be used with cufflinks. I noticed a design for adapters which use buttons, but these did seem a bit expensive for a piece of plastic, so I designed my own! These should slide…
Transform your workspace into a motivational powerhouse with this incredibly detailed muscular male figurine STL file that's perfect for 3D printing enthusiasts and fitness lovers alike! This stunning statue captures every defined muscle…
These buttons are 25mm in height. The scale tool in the slicer can be used to adjust size to suit individual needs. Print face down with no supports for great results. There are separate .stl files for each of the ghost(s), pac-man, and…
