1 / 5
Bed extension for Tshirt print on Prusa MK3 or MK4 — image 1
1 / 5

Bed extension for Tshirt print on Prusa MK3 or MK4

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bed extension to print on Tshirts

Rating
0 / 5
Likes
3
Downloads
19
Makes
0
Views
491
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

Magnets required to tension the Tshirt! Use tape to cover purgeline or disable in the print settings. On the pictures are my first testprints of an .svg of the hubble*. I put the metal print sheet INSIDE the Tshirt → only 1 fabric layer between steel sheet and nozzle.

I printed on a Prusa MK4 with PETG and with first two trys (2 hubbles as seen in the pictures) I still made a mess around the purgeline and 0-height calibrations. Somehow the changing of the g-code in the start sequence of PrusaSlicer did not work out for me.
After the start sequence both prints worked out without interruptionI increased the travel height of the nozzle in the slicer made the print super slow and increased the material flow. Some of these settings I took over from Jakub Kočí :

https://blog.prusa3d.com/how-to-print-on-t-shirts_55588/

Drawbacks: Thsirt has to be folded to a very small height, that it fits under the y-axis. I would recommend some clips to hold it down. but it kinda also worked without for me. The folding of the Tshirt decreases the maximum size of the print significantly.

Overall: kinda works for a first try but leaves room for improvement. Not sure if method of Jakum Koci works with the same platform he designed on MK4. I since load cell would bend the printbed. I will try to design a bigger platform for MK4 and load cell.

 

*For motives you can use the google picture filter setting line art and then convert the picture to an .svg (search for: online svg converter).

Tags