T Handle Hex Key Set Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A basic stand to hold a set of T Handle Hex keys from 2mm to 10mm.
- Ocena
- 4 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a very basic Hex Key Holder designed for to hold these - https://www.aldi.co.uk/workzone-t-handle-hex-key-set/p/807834516680800.
The legs are designed to dove tail into the top. Adjust the base to be a higher infill than the rest to make them heavier at the bottom for stability.
The rest of the parts can be printed with 2 or 3 walls and 10% infill.
Once the legs are joined to the top piece, the stretcher piece at the bottom slides through the two legs and one of the wedge pieces is placed on the outside to hold everything in place.