Martian II Antenna Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Please post a make if you make one! :) This mount was designed to be printed with TPU. Standard 3mm antenna tubes…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Please post a make if you make one! :)
This mount was designed to be printed with TPU.
Standard 3mm antenna tubes squeeze into their mounting holes.
There is a hex shaped recession for the threaded coax connector to pull in to. To install the SMA connector base, insert the connector and then use the mounting nut to pull it in to the hex shaped recess. It's snug and very solid so you don't need to deal with a wrench on the backside when installing / removing your VTX antenna.
Print Settings
Rafts:
No
Supports:
No
.2 quality
Infill:
100%
Filament:
Sainsmart TPU TPU
Category: R/C Vehicles