5050 LED Strip Clip w/ Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My sons wanted LED lights in their rooms but I had to figure out a way to mount them with even spacing from the wall…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
My sons wanted LED lights in their rooms but I had to figure out a way to mount them with even spacing from the wall for a nice straight line install. These light strips are the lightweight (non-rubberized) lights which makes them better for this installation on his ceiling as less weight = less chance to sag.
I have an installation video here: https://www.youtube.com/watch?v=UB5UuVETYkw
After installing 40m of this stuff, this is the easiest/cleanest way I've found.
In my slicer program, I copied/pasted clips to print (30) at a time. Figure one for each 20cm or so.
I used small 3/4" x 17 sized brad nails to mount. (1.5mm diameter x 18mm length )
LED: https://www.amazon.com/gp/product/B07DDBTZZJ/
Extension: https://www.amazon.com/gp/product/B075DYYFPC/
Print Settings
Rafts:
No
Supports:
No
.2 speed
Infill:
20%
Category: Household