5050 LED Strip Clip w/ Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My sons wanted LED lights in their rooms but I had to figure out a way to mount them with even spacing from the wall…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 32
- Makes
- 0
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
My sons wanted LED lights in their rooms but I had to figure out a way to mount them with even spacing from the wall for a nice straight line install. These light strips are the lightweight (non-rubberized) lights which makes them better for this installation on his ceiling as less weight = less chance to sag.
I have an installation video here: https://www.youtube.com/watch?v=UB5UuVETYkw
After installing 40m of this stuff, this is the easiest/cleanest way I've found.
In my slicer program, I copied/pasted clips to print (30) at a time. Figure one for each 20cm or so.
I used small 3/4" x 17 sized brad nails to mount. (1.5mm diameter x 18mm length )
LED: https://www.amazon.com/gp/product/B07DDBTZZJ/
Extension: https://www.amazon.com/gp/product/B075DYYFPC/
Print Settings
Rafts:
No
Supports:
No
.2 speed
Infill:
20%
Category: Household