SD & MicroSD (Transflash) card holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple holder for SD & MicroSD (also known as Transflash) cards.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
Just a simple holder for SD & MicroSD (also known as Transflash) cards. Holds 13 MicroSD cards & 10 full sized SD cards. Modeled mainly using 3D Builder on Windows 10 with SD & MicroSD card logos extruded in Blender from SVG's downloaded from Wikipedia then ‘subracted’ from the main model in 3D Builder to create the cutout effect.
Printer used:
Longer LK5 Pro
Filament Used:
Generic PLA 1.75mm diameter
Print Nozzle:
0.4mm brass nozzle (OEM nozzle that came with printer)
Layer thickness:
0.2mm
Wall thickness:
0.8mm
Top layer thickness:
0.8mm
Bottom layer thickness:
0.8mm
Fill:
20%
Fill Pattern:
Cubic
Heatbed Temp:
70 degrees Celsius (yes I know it's higher than what is commonly recommended, but it seems to work well for me)
Nozzle Temp:
210 degrees Celsius (yes I know it's higher than what is commonly recommended, but it seems to work well for me)
Raft:
Yes
Supports:
None