1 / 1
Adafruit ADXL345 Mount for EVA LGX — zdjęcie 1

Adafruit ADXL345 Mount for EVA LGX

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount an Adafruit AXDL345 accelerometer to the side of a Bondtech LGX extruder using the EVA system.

Ocena
0 / 5
Polubienia
12
Pobrania
62
Wydruki
0
Wyświetlenia
1493
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a remix of the EVA mount for a Bondtech LGX extruder attached to MGN12 rails (part: top_lgx_mgn12_b.stl).

This version extends the right side of the part and makes room for an Adafruit ADXL345 accelerometer.

Why would you want to do this? Two words: Input Shaping :) 

Print the part with the same settings as the other EVA parts. Use the following hardware to secure the accelerometer to the part:

- 2.5 mm, 6mm Cap Head Screws, Qty: 2
- 2.5 mm Hex Nuts, Qty: 2

Note: This part is likely not compatible with other ADXL345 accelerometers as the mounting hole spacing and dimensions are different.

Happy Printing! :)

Tagi