1 / 10
Double Diopter flip for Nauticam Macro port and 2 INON diopters — zdjęcie 1
1 / 10

Double Diopter flip for Nauticam Macro port and 2 INON diopters

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This a holder/flip for Nauticam Macro port and 2 different INON diopters. Features sunken nut casings. The diopter…

Ocena
0 / 5
Polubienia
3
Pobrania
46
Wydruki
0
Wyświetlenia
627
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

This a holder/flip for Nauticam Macro port and 2 different INON diopters.
Features sunken nut casings.

The diopter holders are customized for those I have. There is no guarantee that they fit for you. I highly recommend that you go to tinkerCAD and deign your own.

You need:

2 x M2.5 30mm A2 Stainless Steel 12.9 DIN912 Hexagon Hex Socket Head Cap Allen Bolt Screw

3 x M2.5 20mm A2 Stainless Steel 12.9 DIN912 Hexagon Hex Socket Head Cap Allen Bolt Screw

3 x M2.5 A2 Stainless Steel Hex Hexagon Nut for M2.5 Screw Bolt

2x M2.5 Stainless Steel Black Hex Nylon Insert Lock Nut Self-locking Nylock Nut Locknut

5x M2.5 GB97 A2 Stainless Steel Flat Washer Plain Gasket for M2.5 Screw Bolt

Re-design yourself with Tinkercad: https://www.tinkercad.com/things/6AKFF1isOny

The lock nuts are for the movable hinges, the others are for the tightening clamps.
You most likely will have to redesign this for your port/diopter size.

[UPDATE 03/03/2020]

The file "Diopter Flip Large" had a slanted mounting bracket. I fixed this and now the alignment should be fixed/centered.

Category: Camera

Tagi