Abstract Geometric Toilet Roll Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There are two versions of the design for either end mounting or face mounting.
- Ocena
- 0 / 5
- Polubienia
- 107
- Pobrania
- 302
- Wydruki
- 0
- Wyświetlenia
- 1410
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple yet bold toilet roll holder.
Having browsed online to buy a commercial toilet roll holder that I actually liked I was shocked that the ‘cheapest’ one I would purchase was almost £100! So I decided to design my own and this is the result - far more aesthetically pleasing and around 98% cheaper.
I have created two versions of the design; one to be mounted to the wall via one of the six faces and the other to be mounted via the end/base of the body.
I have printed this piece twice without any supports for the body. The first attempt came out perfectly but I felt that it was a little too flimsy so I went back and thickened up the walls. The second print still did okay without supports but there was an issue with a tiny fraction of the overhangs - my guess is that this happened due to a combination of the temperature in the room that holds my printer being a lot colder on the second print, combined with the fact that the filament I used hadn't been dried before use.
I used paint on supports for the hollow section of the hexagonal bar.
20% infill was used.