Abstract Geometric Toilet Roll Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
There are two versions of the design for either end mounting or face mounting.
- Rating
- 0 / 5
- Likes
- 107
- Downloads
- 303
- Makes
- 0
- Views
- 1,414
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
A simple yet bold toilet roll holder.
Having browsed online to buy a commercial toilet roll holder that I actually liked I was shocked that the ‘cheapest’ one I would purchase was almost £100! So I decided to design my own and this is the result - far more aesthetically pleasing and around 98% cheaper.
I have created two versions of the design; one to be mounted to the wall via one of the six faces and the other to be mounted via the end/base of the body.
I have printed this piece twice without any supports for the body. The first attempt came out perfectly but I felt that it was a little too flimsy so I went back and thickened up the walls. The second print still did okay without supports but there was an issue with a tiny fraction of the overhangs - my guess is that this happened due to a combination of the temperature in the room that holds my printer being a lot colder on the second print, combined with the fact that the filament I used hadn't been dried before use.
I used paint on supports for the hollow section of the hexagonal bar.
20% infill was used.