IKEA Alex Leg 25mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
25mm height to get to overall height of 71 in combination with 25mm Tabletop.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 304
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
My Wife had the idea to take a 2000mm Tabletop and Cut it in two Parts so its the extension to her new height adjustable Office-Table. The Minimum height of the Table is 710mm. so i designed the Legs to compensate for the missing 25mm. The are designed to fit over the existing adhesive feet on the two Alex Cabinets. i mounted them in place with thicker doublesided tape, the will go nowere since there is some load on them. Also added some Felt for easy sliding arround.
Printed With esun Light PLA. Took about an Hour to Print 4 Times with 150mm/s.
- No Brim
- 0.2 Layerheight
- No Supports
- 70% Infill for strength
- 2 Perimenters