Xcelite XL-75 Ratchet Offset Kit Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Xcelite screw driver bits 1/4"(6mm) Hex Shaft and ratchet holder, tool for cramped space.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 1
- Wyświetlenia
- 455
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
If you own an excellent screw bit set and rachet for cramped space and if you are irritated with original useless PVC pouch, as I do, than here is a solution.
Why the original pouch is useles? Because it does not keep content in place. Every time I need this tool, I start to find missing bit which fel out of the dedicated place in the pouch. Sometimes it is enough just to pick up the tool to see one or two bits falling out.
Therefore I have designed my own holder for the ratchet and all four bits. Now all content is always in place, when I need it.
I have used PLA, which is enough good material for the purpose. Details are sliced to 0,15 mm layer height. No support material is needed.
These two parts can be assembled with a bit of 3D print filament. Nothing more is needed
You can hang this holder on a hook or put it in a tool box.
The holder with ratchet inside, may be also used as a handle for screw bits.
This bit set may be obtaied from eBay, Amazon, Element14, Weller-tools…
Another tool accessory.