Honeycomb Earring Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand for attaching earrings and your own custom inserts for your jewelry.
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 226
- Wydruki
- 4
- Wyświetlenia
- 1313
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Women
- Licencja
- Creative Commons — Attribution — Share Alike
This model was inspired by RostaP's (@RostaP) Honeycomb Storage Wall and lysis_to_kill's (@lysis_to_kill_223385) Earring Stand Honeycomb Hexagon. This was made for a friend.
You can design and print your own inserts based on your needs. I also included an image of the dimensions just in case you want to make your own inserts. I included test prints so that you can check your printer's clearances.
Printer settings:
Nozzle: 230 for SBS and 215 for PLA
Bed: 60 for SBS and 50 for PLA
Infill: 15% (Creality Print on Ender 3 V3 KE)
SBS: Fil X - Brass
PLA: SA Filament - Gun Metal