Wyniki wyszukiwania: earings

Gears without movable bearings.

The bearings were constantly pulling off my print bed, and failing my print. I modified the gears and fused the bearings to the outer ring. The gears still spin with just the inner ring being unconnected.

Dual 625RS/625ZZ Bearings V Pulley

Press fit the bearings into the pulley.

Longer Prusa Spool holder (MMU compatible) with printable bearings

From the first time I got my MMU, I didn't like the margarita style spool holders for the buffer, because it requires space that I do not have. I came up with this solution. It can accomodate up to 4 spools on top of Prusa MK3. I only use…

Printable Bearings (Bushings)

About the model: A simple 608 size bearing replacement for when you can't be bothered to order the real thing for your simple little 3D print and would rather just print the bearings too (we've all been there right?). They spin very…

Tanjiro Kamado Earings (or keychain) Demon Slayer

This design is the same as tanjiro's iconic earings, with colors fully customizable in slicer (separated body's) Printed with fine settings. as you can see in photos quality is good, if you want it in bambu or orca you can open it up in…

Spool Holder Remix (625-2RS Bearings)

This remix is for anyone with leftover 625-2RS bearings from a Voron build. I took the stand and rollers from my dry box design and streamlined the base to be used without the container. (Of course, you could use the original without the…

Gridfinity 688ZZ Bearing Holder - 28 Bearings

I remixed TallackMedia Gridfinity 608ZZ Bearing Holder to hold 28 688zz bearings with both versions the 3u and the 6u Stackable. Both versions have tight tolerance to hold the bearings in place.

RC Car Differential with Bearings

More 3D-Printed RC cars here. Btw, I made a new, better RC Car: It's available here: This 3D Printed RC car requires some components: https://itkacher.com/pages/3d-printed-rc-car-parts-list-bom

Bearing tubes with ID ring for 606, 608 and 625 bearings

I printed recently a tube for 608 bearings, I found on Marker World site. And I was frustrated to don't have similar tubes for the other bearing references I owned. So I completely redesigned several tubes to store my 625 and 606 bearings…

Print in place bearings V2

The bearings are composed of three interlocking rings that can slide past each other to reduce friction. Printable bearings are great for prototyping because they are lightweight and easy to work with. Quick tips for successful print: Use…

MK4S Dual Spool Holder with Bearings

You'll need four 608 ball bearings, four M4 x 20mm button head screws & 2 hex nuts, plus the original M3 x 18mm screw used on the original filament guide. 2026-04-06: V2 addresses an issue reported by @mgranger114

Z809 Bearings holder

12x Z809 Bearings

Filament holder axle with load cell and bearings for filament scale

Overview This is the filament spool axle for a filament holder equipped with a load cell. A brake may optionally be installed to limit coasting. Designed in FreeCAD , source files included. Designed as an extension/replacement of the…

Holiday Fidget Spinners Collection - no bearings needed

Looking for quick, fun prints to spread some holiday cheer? This collection of holiday-themed fidget spinners hits the sweet spot between festive and functional. Each design features clean silhouette-based shapes—Christmas trees, snowmen,…

Spool holder for a Dry Box from AliExpress. On bearings. 6204-2RS 20x47x14.

You can buy these airtight boxes on AliExpress: "3D Printer Filament DryBox Storage". I redesigned the holder for them because I really didn't like the standard one. A heavy TPU spool didn't want to rotate on it at all. I found cheap…

CORE One+ Spool holder with 6807 bearings

Update: Added parts for 2kg spools. -"spoolholder_center_2kg" -"spoolholder_tube_2kg" This spool holder uses the original bayonet fitting "puck" from the CORE One+ spool holder. When this one is printed and assembled, it can easily be…

V Block with 608 bearings

Remixed v4cascade's model of a V block with bearings to fit 608 size bearings. They should press into place.

Filament stand for 1KG spools with bearings

Filament stand for 1KG spools. Shaft is hexagonal to make printing horizontally easier. Printing horizontally is better for strength. Requires 2x 608 bearings Print instructions: 1x Base, print without supports 1x Shaft, lay horizontally…

5 kg spool holder 608zz bearings

EN Stand for large 5 kg filament spools. The print does not require supports. Final assembly is done by gluing the parts together with cyanoacrylate (Super Glue). Press 608ZZ bearings into the rollers. then insert the spacer sleeve from…

Spool Center Roller for 6900ZZ bearings

I didn't have any spare 608ZZ roller bearings on hand, but I had a number of 6900ZZ roller bearings. The 608ZZ has an outside dimension of 22mm and an inside dimension of 8mm. The 6900ZZ roller bearings have an outside dimension of 22mm…

Wall mounted filament spool holder with 608 bearings.

Just added more wall mount screw holes. and split the roller body for easier printing.

Smooth ball bearings - 6mm airsoft pallets

Description Smooth running ball bearings built from 3D printed parts and airsoft pallets. Low cost, easy to make, and ideal for custom, non standard sizes. Available sizes: *if you need a size or shape that is not listed in the table,…

HSW spool holder with bearings

Spool holder with bearings for Honeycomb storage wall. You need two bearings 608 ZZ, M8x60 screw and M8 self locking nut.

Smooth Bottom Filament Guide with 608 Bearings – Creality Ender-3 V3 KE

This project is a bottom filament guide system designed to improve filament feeding for the Creality Ender-3 V3 KE. The goal of this design is to provide smoother and more controlled filament movement when feeding from below, reducing…

Dustproof Storage (10u) for 608 Bearings - Snap-Fit

I needed to store some bearings I had lying around, so I designed this to hold exactly 10 units. This container has a snap-fit lid with an additional lip to keep dust or debris out—whether you're storing metal skate bearings or 3D-printed…

Drybox filament spool holder (no ball bearings needed)

For this filament spool holder, I wanted to avoid using ball bearings because I did not have any at home. Honestly, using bearings for this purpose would also be a bit of overkill. Another goal was to fit the widest possible spools. In…

Sillybutts Breacher Lifter Roller with Bearings (Smoooother Prime)

A new version for the “Lifter Roller” with ball bearings. I had the problem that the screw thread had eaten into the lifter roller (see pic), causing a lot of friction and making it very difficult, or even (if I pushed slowly) impossible…

Fidget Spinner Cap (for bearings that are 22mm)

Just caps for the fidget spinner that I have uploaded.

stackable nema 17 gearbox 1:4 per stage (no bearings)

Snapmaker U1 Spool holder with bearings

And another spoolholder for the snapmaker U1. It is a complete makeover of an existing one at maker world. You'll find two different sizes. The short one holds spools up to 66mm width, the long one up to 88mm. You'll need 2 bearings 608…

Turtle earings

Recommended print settings: Print with a small layer height. The hole may sometimes be partially closed, so use a heated pin to open it. Filament usage: This model uses approximately 27 cm of filament. Dimensions: 21 mm × 10 mm × 5 mm

Low profile filament spool roller (685zz bearings)

I desingned a low profile filament roller for my needs, and i share it with you. Use 4 ball bearings 685zz (5x11x5). Fitting of parts is pretty tight and firm, so better print with random seam. You can use glue on the connecting rods if…

Horizontal spool holder with quick release and 4 x 608 bearings

I found three useful designs and merged them to become a 4 bearing horizontal spool holder with a quick release spool hub. The hub is detachable from the base for ease of loading on a new spool. The design uses 4 off 608 bearings and the…

Spool Holder Snapmaker U1 with 608 Bearings Super Smooth

Filament spool holder for the Snapmaker U1 printer. The design is based on a cylindrical structure with two standard 608 / 608Z bearings. It allows the spool to rotate very smoothly and freely, while also supporting all spool sizes,…

167mm Rod for 608ZZ bearings needed for IKEA 365+ Drybox

These are 3d printed rods for replacing the M8 threaded rods needed for this IKEA drybox model: It prints alright vertically in a core-xy printer - even though it already flexes around on top. Use a brim for adhesion. Bed slingers…

Worm Gear Assembly - Ball Bearings & D-Rod

This model is intended to be used with generic ball bearings (uxcell 626ZZ Ball Bearing 6mm x 19mm x 6mm available on amazon) and steel d-rod with a ground flat (5pcs Stainless Steel D-Shaft 6mm Round Steel Rod Linear Rail Shaft Robot…

Bearing tube for 606 bearings

A simple container for eleven 606 bearings with a threaded cup. Print settings Layer height: 02.mm Nozzle: 0.4mm Infil: not applicable Supports: no Brim: no

Printable 608 bearings with lubrication channel

3D printable 608 bearings. If you need a different size bearing, the FreeCAD file is included. Update 2026-04-18: Added a model with half-inch (12.7mm) nominal inner diameter for use with half-inch dowel rods (see photo). It maintains the…

Rotating Imac 24" stand with roller bearings

Print at 0.2mm, minimum 3 layers for the rolls; 2 layers may suffice for the rest 44 rolls to be printed and installed alternately as shown in the illustrations

8mm linear plain bearings

8mm linear plain bearings

Prusa Mk4 upgraded Spool Holder with 608 Bearings

Created the parts, I used the simple Microsoft 3D Builder. Printed all parts on my Mk4 printer. Prusa's engineers who designed their spools need to go back to the drawing board and re-design the center, 51mm, slot. The "speed bumps"…

Wavy Triangle Fidget Spinner No Bearings

This wavy triangle fidget spinner is an all-in-one, quick print that does not require any bearings or extra parts. Simply click print, and in about 30 minutes, snap the caps together and spin to your heart's delight! For more fun, print…

Platen Roller Bearings/Clips for Zebra GK420T, GX420T, GK430T, GX430T

Platen roller bearings/clips for the Zebra GK420T, GX420T, GK430T, and GX430T. I've personally designed and tested these with my GX430T. Intended to replace the OEM ones from Zebra, designed with ease-of-print in mind without supports.…

Fixed (No Bearings) Filament Spool Holder

A spool holder that doesn't use bearings. Fixed Roller and can be mounted to a shelf, wall. or Flash Forge ADM5 Pro. Please Read the pdf file found in files for more information. NOTE: I'm currently working on a filament guide that will…

Filament Spool Holder #001 (Bearings, Simple design)

3D Printed Filament Spool Holder with Bearings – Simple Design, Tool-Free Assembly This 3D printed filament spool holder is designed to provide a practical, durable, and easy-to-assemble solution for any 3D printer setup. Its minimalist…

CW2 Filametrix Dual Sensor Mod for MR52ZZ Bearings

This is a currently untested mod to change out the 5.5mm ball bearings in the dual toolhead sensors. I am currently in the testing phase and waiting for my MR52ZZ bearings to come in. Anyone else that would like to test this, use at your…

Replacement Ball Bearings for RevEx2 Bcar

A replacement ball bearing for the rev ex 2, although it might be able to be used for other Bcars. Only hardware is the m3X10mm screws like the original rev ex 2. Enjoy!!!

adjustable Filament Spool Holder with or Without bearings

An adjustable spool holder with multiple options. It can be a standalone or mounted. I have created side, back, and top mounts that will fit the FlashForge 5M Pro. If you are interested in mounting to any other printer and have any CAD…

Filament Spool Wall Holder with Bearings

This is a filament spool holder meant to be screwed in to a wall or a piece of furniture (ikea kallax in my case). It is made to fit a 16mm (5/8 inch for burger people) wooden roller, just make sure to research which hardware store sells…

Spool Holder for Rubbermaid Dry Box (625-2RS Bearings)

The Rubbermaid 21 cup container makes a convenient dry box for humidity-sensitive filaments. My design needs a single hole in the container for the bowden tube passthrough, and uses rubber washers to preserve the airtight seal. There is…

Shimano Crank Tool for 20T Bearings

TL;DR : Sturdier than other models Fast to print Precise fit Print with 50% infill Customize using .f3d or .step files! --- If you are in need of a removal tool for your Shimano crank bearings, look no further! Let it be an e-bike…

SKF 6000 series ball bearings

SKF 6000 Series Ball Bearing Archive

SKF 6200 series ball bearings

SKF 6200 series ball bearings archive

Replacing Mountain Bike Suspension Bearings with 3D Printed Tools

I used these tools to replace the 6 pairs of bearings in my mountain bike suspension. You can buy the specialised tools to do this but I wanted to see if it was possible using my own 3D printed tools. The rear suspension triangle started…

half-life necklace/earings

i made a necklace and earing out of the half-life logo made in fusoin 360 by a newbie and a 12 year old this is a compotoin i want to win as i NEED prusametersto get a 3d printer

Spool Holder for 2020 Extrusion (625-2RS Bearings)

This spool holder can mount to any printer with 2020 extrusion. (The fit was tested with LDO 2020 frame.) One side of the mount will stick out past the extrusion by about 9 mm because of the print orientation and size of the bearing. You…

Parametric Suitcase Wheel (NOW WITH BEARINGS)

As it's parametric, it can actually fit for a big range of suitcases. Mine is a Delsey one. You should print two parts separately, the outer ring out of TPU, and the inner ring out of PETG or smth I dunno:) 100% Infill, the more…

Spool holder with 608 bearings for Elegoo Neptune 4

After creating the simple spool with sleeve for my Neptune 4 I always wanted to have one with bearings. I like HugoHuge's design , but it is too long and bulky, so not possible to use with 250g reels I have. Also, the design has to be…

MK3 to MK4 Z-Axis 8mm (keep all 8mm rods and bearings)

These parts allow you to use the new MK4 parts on your stock Prusa MK3/S/S+. There is no need to buy new rods or bearings, but you will need some extra bolts, nuts and a slightly longer x belt . As the MK4 has a wider X carriage you will…

Spool holder with 626 bearings for Elegoo Neptune 4

After creating the simple spool with sleeve and the spool holder with 608 bearings for my Neptune 4 I wanted to create one with bearings where reel will sit on top. It is attached at the top of your Netpune 4 frame instead of original…

Very Small Fidget Spinner (681 bearings)

Mini Lathe Spindle Spacer for 30602J Bearings

Here's a spacer to accommodate for the extra width of the 30602J bearings when installed on mini lathes. Dimensions are based on the real spacer with 1.5mm subtracted from the width, so fit is just as sloppy as the real one. ABS is…

Down Quark — 3 KG Filament mount for 6001 Bearings

Welcome! Here you have another take on the 3kg spool mount Bill of materials: 125g PLA, PETg, or really any filament 2x 6001 bearing (8x28 size, shielded or not) Assembly: Print 2 stands and connecting rod. Ideally you should lie it down…

100+ Ball bearings in standard sizes (608, 6200, 6202, 6204, 6206, 6000 and 6305 etc.) - uses airsoft 6mm bb balls or 4.5mm steel balls

UPDATED: Slightly larger tolerance (0.1mm diameter for the bearing balls). Choose random seams if you printer is not well-calibrated. I recently needed a slimmer ball bearing for a spinner project, so I did my own take on ball bearings to…

Filametrix Body (CW2) for SB2209/SB2240 with Dual Filament Sensors and ECAS - larger ball bearings

Modified to work with 6.3mm balls i got from an old bike bearing. The original description also says that it's not compatible with original hotend mounts, but that's what I'm using and it works so idk.

Print In Place Ball Bearings

These print in place bearings take 23 minutes and can be printed to understand the engineering and how ball bearings work or they can be printed for a fidget toy! https://youtube.com/shorts/-sOsR-bVKwU?si=yNJgMYLl0p9agQ27…

Neptune 4 (PRO) fillament holder - 608 bearings

I used bolt 8x120mm, two M8 nuts and two 608zz bearings. Simply put bearings to each side of holder tube. Put M8 bolt through bearings and holder thread. On side of holder thread tighten the nuts against each other. You can see complete…

Spool holder with bearings made shorter for little spools (250g)

Spool holder with bearings made shorter for little spools like Sunlu 250g.

RC Tank T-34 PS. 231-1 ABS Bearings

Sliding bearing for tank tracs wheels. Material ABS.

Solder Stand with ball bearings

@PURI made a very nice solder stand with 608Z ball bearings. It didn't fit the quite large ERSA 500g solder spools (about 62mm wide and 11mm inner diameter). This remix adds 25mm width to the stand and has guides with 10,5mm diameter.

YOKO Roller Fidget - 608 Bearings

After trying out most of the other fidget roller designs, I found most of them lacking in one way or another. Specifically none had the kind of solidity and stability I wanted from the design. So I got to prototyping and eventually came…

Tush using V-Wheel bearings

This is a slightly modified Voron internal spool holder based off of Resizable TUSH. This make only includes the modified bits and not the “slide” and the bowden tube holder. Those can be found on the parent design's page. You will need:…

Geneva Mechanism With F6901Z Bearings

This Geneva mechanism uses F6901Z Flanged bearings to smoothly rotate when in operation. This model is great for learning how the Geneva mechanism works. It also makes a great desk fidget toy. It only requires you to print 3 very simple…

Honey Comb Bee Earings

Bee Earrings for women. The file can be sized up to make a pendant.

Smooth Bearings

Smooth replacement bearings in many popular sizes, using two printable parts with a fill hole for 6mm hardball plastic pellets. Dimensions are spot on, so your printer should be reasonably tuned to ensure a smooth fit. I've used PETG but…

Spool Ceiling holder with bearings & quick replace

A slight remix from the excellent model: https://www.printables.com/model/175677-ceiling-spool-holder so I could easier swap out filament rolls and a few other minor tweaks.

Adjustable Filament Spool Holder / Roller with 608 bearings, no tools needed

Adjustable Filament Spool Roller with 608 Bearings Designed to fit any spool with very little material use. No supports required. Does not take up much storage space when not in use. The part needs to be printed twice. The bearings (608)…

Snorkel-Fishing Rod W/ Bearings

Remix of Snorkel-Fishing Rod to add bearings for smoother action. I kept everything else the same. Takes 2 12mmX18mmX4mm bearings:…

10cm Tube for 608RS bearings

no Supports use brim

Filament spool holder with bearings

I got annoyed of the original spool holder from my Anycubic Vyper, because the spool always swings when filament gets pulled. So, I designed a spool holder that runs smoother. The holder is desinged in two parts, male and female. Between…

Roller 73.5mm for 608zz bearings, narrow stand

The size of tube inner walls in the sourced model was not optimal and 2 inner walls can't be printed without constant interruptions which leads to very long printing time. I optimized it by changing the inner wall width. Also I manually…

Adjustable Spool Holder - FLSUN QQ (608 zz bearings)

There are already several re-mixes of this spool holder for the FLSUN QQ, but none support the 608 zz bearings I already have. The only difference from the original are 2 holes for m4 screws that are used to mount it to the top of the…

thrust bearings

Modelo inspirado en el cojinete f8-22m thrust bearings, evita la carga sobre el eje de su motor Z. Este cojinete es una pieza de precisión considere la calidad de su impresora 3d. Impreso a 0.1mm. Material: PC carbon fiber. Relleno: 20%…

Bambulab A1 Mini Spoolholder - modified for ball bearings

Took the great work and cut the model to add a hole for M8 thread to mount 608 ZZ ball bearings. You need a M8 threaded rod, a bunch of small washers, two big washers and the ball bearings. Put the small washers in between the bearings to…

Filament Spool Holder with Bearings for Prusa XL

A replacement for the stock filament holder which uses 608 bearings for a smoother experience and has modular ends for different spool widths. I tested it with spools up to 2.3 kg without any issues so far. Because it's an XL I printed…

Prusa MK3 / MK4 Y Schlitten mit 5 Linearlagern / Prusa MK3 / MK4 Y carriage with 5 linear bearings

Bitte beachten sie, dass wenn sie die Halterung für die Linearlager ausdrucken, auch der Y Motorhalter und die Halterung für die Linearführungen erneuert werden muss, sonst schleift das Druckbett am Y Motorhalter. Englisch: Please note…

Omni Directional Treadmill ( Roller Transfer Bearings )

This is mostly a concept design. I have not printed it on my XL yet. If you print this please be smart and wear PPE! Helmet, Knee Pads, Elbow Pads, etc. Also, probably print it at like 50% infill with plenty of shells. Idea is this would…

Spool adapters for 22mm bearings

So first let me tell you that using bearings can cause filament spools turning to easily. This can also lead to problems but for me this has always worked out quite well. Probably because the spools have some resistance in rubbing against…

Filament Spool Holder for V-Slot Wheels with 625ZZ Bearings

Features Holds a 200mm or 300mm spool. Allows you to upcycle your worn-out Ender-3 625ZZ V-Slot wheels. Can be placed on top of round conduit / bar / pipe using the v-slots of the skates. Prerequisites 4 x 20mm M5 screws 4 x V-Slot Wheels…

GT2 Belt Tension Meter with 604zz Bearings

Adaption fprn604ZZ Bearings.

Stitch earings

I recommend using the .3mf file, as it features built-in surface smoothing for a polished finish. For a luxurious look, you can paint the earrings with a metallic acrylic spray as shown in the picture. Earing size : 3 x 3 cm

Hamster Wheel (with bearings)

All parts can be printed without or very minimal support. Printed part list: Wheel Leg - Right Leg - Left Base - Back Base - Front Arm x2 Seeger - Small x2 Seeger - Large x2 Other parts: M3x12 screw x6 M3 nut x6 Ball bearing x2 (inner…

Parametric spool holder with bearings

I could not find a string spool holder that I liked, so I made my own. The model was intended to allow a spool of line commonly available from Home Depot to slide over the core of this model. Then the two halves of the model can screw…

Adjustable spool holder for 6002 15mmID bearings - remixed

I made remix of spool holder. Its longer and wider than original version. Suitable for 3kg+ spools. Fits on 200x200 bed.

Prusa injection molded holder upgrade to use bearings 608

The design of this part was driven by the need to minimize friction between the holder wheels and the spool. When manually rewinding filament between spools to create longer samples, I often encountered issues at higher speeds where the…

Spool Stand Roll for 608 or 628 ballbearings

I designed this spool stand to be used with 8 millimeters metal ball bearings. The stand is made out of 3 pieces to be printed with no support. However I propose 2 different diameters for the rolls: Ball bearing 628 compatible: 8x24x8…

Luggage wheel with ball bearings

Fits at least a President-brand luggage. Originals had “hand brake” on due to poor design, wear and tear. These have two 608 ball bearings. I used PLA, but I guess ABS / PETG would work fine too. I used a M5 machine screw as shaft, and…

Spoolholder with ball bearings

This is a spoolholder that runs on ball bearings for Materials like TPU that require the least possible friction. It fits in the original Spoolholder arm from the MK4. For the assembly you need an m8x80mm bolt and (of course) 2 ball…

BEARINGS - BEARING COLLECTION - Print In Place

Print in place bearings DIN 625 A oopening is added to insert lubricant TESTED !!! IF YOU NEED OTHER DIMENSIONS? JUST LEAVE A COMMENT

Gridfinity | Bearings Storage Bin for Original Gridfinity

A Gridfinity bin for storing your typical 608 bearings. The original was made for the Gridfinity Refined version, so I modified it for the original Gridfinity system. Original by LaPicardía…