1 / 4
Peristaltic Pump _ Nema 17 _ 608 Bearings — zdjęcie 1
1 / 4

Peristaltic Pump _ Nema 17 _ 608 Bearings

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small peristaltic pump for Nema17 and 608 Bearings. I use a 6mm Silicone tube

Ocena
0 / 5
Polubienia
41
Pobrania
391
Wydruki
2
Wyświetlenia
1812
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Engineering
Licencja
Creative Commons — Attribution — Noncommercial

as i only had 608 ball bearings, i created my own peristaltic pump. 
It is to be used for dosing fertilizer solutions in the hydroponics sector, but will certainly also work in other areas.

- All the screws required are M3. 
- The silicone hose should have an outer diameter of about 6mm.
- I use a standard nema 17 stepper motor with 42N/cm
- You can find the wiring and programming in various videos on youtube - I have not made any instructions myself due to the high redundancy

 

-----------------------------------------------------------------------------------------------

-----------------------------------------------------------------------------------------------

 

da ich nur 608 kugellager hatte, habe ich mir eine eigene peristaltik pumpe kreiert. 
Sie soll zum Dosieren von Düngerlösungen im Hydroponik bereich verwendet werden, funktioniert aber sicher auch in anderen Bereichen.

- Alle  benötigten Schrauben sind M3. 
- Der Silikonschlauch sollte etwa 6mm Aussendurchmesser haben.
- ich verwende einen standard nema 17 Schrittmotor mit 42N/cm
- Die Verkabelung und Programmierung findet ihr in diversen videos auf youtube - ich habe wegen der hohen redundanz selbst keine anleitung dazu gemacht

Tagi