SV06 SV06+ leveling mounting plate, Mod to access Probe grub screw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple mod (hole) to Probe mount plate to give direct access to the levelling grub screw.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 486
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
To simplify and make direct adjustments to probe level added an access hole to reach the grub screw without partially diss-assembling the mount. Lot easier to set the level on probe if changing nozzles.
This could be done to the original part by drilling a 2.5mm hole in location shown. I needed a replacement as I'd pulled the top bolt through the mount.
Added chamfers to print without support.
Added simple tool to set probe height. Loosen probe and lower head until nozzle on lower platform then slide probe to upper platform. Tighten probe.