PS5 Access Controller Pad Switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pad switch for the Playstation Access controller
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 324
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
Ongoing development - feedback welcome!
Pad switch for the Playstation Access controller, with mounting points for optional springs to adjust resistance.
Part of a collection of button caps and external switches for the Playstation Access controller:
https://www.printables.com/@Harakan_1552161/collections/1266232
To make a switch, two parts should be printed:
- Switch base
- Switch top
For each switch, you will also need:
- 12mm x 12mm x 7.3mm tactile switch (e.g. https://www.digikey.com/en/products/detail/omron-electronics-inc-emc-div/B3F-5050/368377)
- 3.5mm mono cable (e.g. https://www.digikey.com/en/products/detail/tensility-international-corp/10-00344/2350247)
- (Optional) 6.5mm x 10mm spring(s)
See the attached PDF for detailed assembly instructions ("Low_Profile_Switch_Assembly_Guide.pdf").
Print settings used:
Slicer: OrcaSlicer 1.9.1
Printer: Anycubic i3 Mega S, 0.4mm nozzle
Material: PLA (light grey / black)
Quality: Standard, 0.2mm layer
Walls: "Inner/Outer" wall printing, 3 walls, precise wall
Infill: 15% rectilinear
Support: No
"PS5 Access Controller Pad Switch" designed by Harakan, licensed under CC BY-SA 4.0.
https://creativecommons.org/licenses/by-sa/4.0/
Revision History
Version 1.0 (22-Feb-2024)
- Initial release