Bit Holder(s) for Icon Mini Ratchet (Meme Tool)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two extra holders that fit in the mini ratchet case to support an extra two bits.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 132
- Wydruki
- 1
- Wyświetlenia
- 2460
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Add 2 more bit holders to your ICON mini ratchet set. Custom design meant to utilize what little unused space ICON has left in the case.
I printed them out of TPU so they are semi-flexible and similiar to the material already used in the case for the other bits.
They are held in by utilizing an existing bit already inside the case (see photos). Optionally, you can glue it if you want it permanent.
For the bit holder near the edge, this needs to be a low profile bit (see photo for clearance). This is easily accomplished by shifting the existing bits over, allowing you to place a larger bit somewhere else. You can see the different colored bits in the top right that are the new ones I added.
There are two styles in the photo. Both are unique and designed to fit in each specific location. You can choose each individual one or print both for two extra bits.