VESA adapter plates for T16000M Joystick/Throttle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed an adapter so I could mount my T16000M flight stick/throttle with M6 hardware to a VESA plate
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 755
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed everything to work with these VESA mounts that clamp around my chair arms:
https://amzn.to/4aFsOpu (affiliate link)
And this set of M6 bolts and threaded nuts:
https://amzn.to/3UbP2de (affiliate link)
For the VESA arm (ignore this if you're using your own VESA arm instead of that one in the amazon listing) you'll need to remove the bolt holding on the head piece to pivot it to facing up. Not enough clearance to rotate it with the bolt in up but plenty of clearance to take it fully off and then put it back on. By default the head comes facing forward like you would want for a monitor.
Used the dimensions available through Thrustmaster's website to place through-holes in the plates for the joystick and throttle:
https://ts.thrustmaster.com/download/accessories/Manuals/T16000M/T16000M-FCS-cockpit-Setup.pdf
https://ts.thrustmaster.com/download/accessories/Manuals/TWCS_throttle/TWCS-Cockpit-Setup.pdf