Neptune 3 Pro Clip-On Printbed Guide (No Adhesive Needed) | Shorter Version | REMIX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This will help you align the PEI sheet on your Neptune 3 Pro
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 178
- Wydruki
- 2
- Wyświetlenia
- 907
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
UPDATE 1: made a new model from the scratch – it's super tight fit and hard to install but worth it
Description:
This is a shorter version of the original model:
https://www.printables.com/model/750023-neptune-3-pro-clip-on-printbed-guide-for-left-corn
Original model is nice but it's a bit tall and get hit by nozzle – so I made a shorter version.
From the original description:
The only (as far as I know) zero-adhesive printbed guide designed specifically for the Elegoo Neptune 3 Pro. This will easily clip onto the back left corner behind the print bed. Very very easy to print (10 min) and install (30 sec), but including some tips below.
- Use PETG or another high-temp filament. PLA might work, but would likely deform with the bed temperatures
- Each “hook” is sized slightly differently, so please note the Left and Right engravings to ensure proper orientation
- This will clip right onto the dark blue cable holder in the back left
Notes:
You can pair it with this right corner snap (no adhesive) clip:
https://www.printables.com/model/542417-elegoo-neptune-3-pro-pei-sheet-alignment-stop-modd
Or this one (with double sided tape):
https://www.printables.com/model/427555-printbed_guide-for-elegoo-neptune-3-pro