Neptune 3 Pro Clip-On Printbed Guide (No Adhesive Needed) | Shorter Version | REMIX
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This will help you align the PEI sheet on your Neptune 3 Pro
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 177
- Makes
- 2
- Views
- 902
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v2.0
UPDATE 1: made a new model from the scratch – it's super tight fit and hard to install but worth it
Description:
This is a shorter version of the original model:
https://www.printables.com/model/750023-neptune-3-pro-clip-on-printbed-guide-for-left-corn
Original model is nice but it's a bit tall and get hit by nozzle – so I made a shorter version.
From the original description:
The only (as far as I know) zero-adhesive printbed guide designed specifically for the Elegoo Neptune 3 Pro. This will easily clip onto the back left corner behind the print bed. Very very easy to print (10 min) and install (30 sec), but including some tips below.
- Use PETG or another high-temp filament. PLA might work, but would likely deform with the bed temperatures
- Each “hook” is sized slightly differently, so please note the Left and Right engravings to ensure proper orientation
- This will clip right onto the dark blue cable holder in the back left
Notes:
You can pair it with this right corner snap (no adhesive) clip:
https://www.printables.com/model/542417-elegoo-neptune-3-pro-pei-sheet-alignment-stop-modd
Or this one (with double sided tape):
https://www.printables.com/model/427555-printbed_guide-for-elegoo-neptune-3-pro