DJI Mini 2 / Mini 2 SE diffusor clip for Vifly Strobe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Combines clip & diffusor function for Vifly Strobe
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 1140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mounts the Vifly Strobe to the base mount without tape and at same time turns the 3 white LEDs to “legal” green for night flights in Germany which is far brighter than the single green LED on the Vifly.
Works as diffusor which turns the strobe flash well visible from all directions. Really helped me to extend my VLOS range - also in daylight.
My dji Mini 2 SE + Vifly strobe + original mount + diffusor weights 248g all together - still in limit!
Print in translucent green PETG. Print “laying on the bed”, no supports needed. Used just standard settings with 15% infill.
There is a rumor that translucent PETG prints should be printed very slow for best results - tried standard and slow, but couldn't figure out big difference.