Contoured Headphone Wallmount Remix with Top Mic Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick remix of @Marvson's 'Headphone Wallmount' with a small feature added to hold a detachable headset microphone.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is a quick remix of @Marvson's Headphone Wallmount.
A small grabber was added at the top to hold a detachable microphone.
It was sized to fit the mic that came with the Vector Finesse V1 head(amame) headphone hardware kit. The feature is intended for a mic with a relatively stiff flex arm -style design and should fit those with a diameter measuring just under 4mm.
The contours at the bottom of the additional feature could probably be improved. Addition modeled in Fusion360 as a separate piece with the original STL used as reference. Step and Fusion files are included. The combined stl was created by adding the mic holder as a new body to the original mesh in Prusaslicer and exporting from there.
All credit to Marv for the original design. As a remix, this model inherits Marv's choice of license, the Creative Commons (4.0 International License) Attribution-NonCommercial.