Earl of Lemongrab (Adventure Time) Figure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An approx. 8" tall figure of Earl of Lemongrab from Adventure Time
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 282
- Wydruki
- 0
- Wyświetlenia
- 1439
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Share Alike
I printed this model in one go on my Ender 3 Max using custom organic supports made in PrusaSlicer 2.7.1
The included 3MF file will allow you to edit the settings (in PrusaSlicer, haven't tested it in any other slicers), and the gcode is the exact settings used to print.
Most of the arms will print long before attaching to the body, so I very much suggest using organic supports and checking the print to make sure they are fully stabilized. A single block of regular support won't cut it and will collapse, it needs to be surrounded.
The hands came out surprisingly sturdy but I would still be careful getting the supports off. The way I did it was to use my filament clippers to cut off most of the supports by hand before plying them off so I was working with smaller pieces. Same with the nose. Also the tongue may look flimsy but actually came out well attached and movable even making it easier to paint (also it doesn't need supports).
I also included the original blend project file for those who may want to make edits, or split up the model for easier printing. This was one of my first models in blender and ended up being super high poly count and frustrating to work on, hense the large file size and load time, or I would have done it myself.
Primed and painted with acrylics. Printed with Hatchbox cool gray PLA.
Sorry about the bad optimization but again, one of my first models!
Enjoy!