468 modeli
Easy to print roller for forming perfectly round pearls for making jewelry, decorations or for children. Ideally suited for use with polymer clay. But also suitable for fondant or children's modeling clay. In 100% size, the Christmas tree…
Wydruk około 0,32 €–0,40 € nettoWstępna wycena jednego wariantu
Nice little valve cap for all the early bird riders out there. The eye of the bird is a piece of filament that is pressed in and cut off flush. Works with sclaverand/presta valves.
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed this model in one go on my Ender 3 Max using custom organic supports made in PrusaSlicer 2.7.1 The included 3MF file will allow you to edit the settings (in PrusaSlicer, haven't tested it in any other slicers), and the gcode is…
Wydruk około 9,54 €–11,66 € nettoWstępna wycena jednego wariantu
Simple angled laptop stand for my Macbook Pro. Wanted a sharper angle to take up less deskroom. Will likely support other laptops -- the gap between vertical supports is 17mm. Inspired by this design but rebuilt in Tinkercad. I wanted to…
Wydruk około 3,17 €–3,87 € nettoWstępna wycena jednego wariantu
Girl With a Pearl Earring Plaque and Wall mount Feel free to cut frame down to your liking. Painted around 1665: The exact date is uncertain, but it's believed to have been created during the mid-1660s. Mystery surrounds it: Much about…
Wydruk około 2,19 €–2,68 € nettoWstępna wycena jednego wariantu
These are very simple tweezers, similar to the one supplied with a water mist magic pearls . I made it since we did not found spare parts in the local store.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Officer Earl Devereaux From Cloudy with a Chance of Meatballs.
Wydruk około 7,67 €–9,38 € nettoWstępna wycena jednego wariantu
A great benchmark tool once you've got a million Benchys floating around. Experiment with different settings to get a good, clean print. Polymaker has published some suggested setting changes here . The recommended settings below are…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
This is a knob modeled to match one that had broken off due to age on a pre-A 356. The switch paired with this knob was used on several Porsches, as part numbers 356.61.045 (356 pre-A/A), 644.613.501.00 (356 A/B/C), and 901.613.043.00…
Wydruk około 0,23 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Perle Pikachu Ce modèle se compose de 5 fichiers Partie avant - front side Partie arriere - rear side Yeux Bouche Nez (sur le slicer Prusa le nez n'est pas facile a placer, sur la Bambu pas de soucis, mais attention il es très petit… Il y…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Andy's model modified to fit the Mini+ printer specifically: 1) increased the height to 25mm 2) widened the base to 23mm In this way the two risers fit perfectly into the slot left by the hinge of the display and even if you move the Mac…
Wydruk około 1,23 €–1,50 € nettoWstępna wycena jednego wariantu
This is a dispenser of little things like candies for your lovely kids, pearls for your lovely wife or pills for your lovely grandmother :-) Just lift the lid and be surprised about what this heart will spend you! Watch a short video clip…
Wydruk około 11,26 €–13,77 € nettoWstępna wycena jednego wariantu
Another coaster for your favourite tea mug, based on Picard's famous request of the Enterprise Replicators. I've included the colour change .gcode made with PrusaSlicer along with the normal .stl.
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
Deutsches EU-Kennzeichen Lang und Einzeilig mit Spasstext “MEINE PERLE” (= my pearl) More of my license number plates: https://www.printables.com/model/1200241-kfz-kennzeichen-sample-german-eu-number-plate-einz…
Wydruk około 1,74 €–2,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you have a Pearl 900 series cymbal stand and this piece broke for you, I got you covered. I designed this because mine broke back in 2018 and I was on a hurry. 7 years onwards and its still working perfectly ! If you don't want to…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed mine laying down but I've included the gcode for both laying down and upright versions.
Wydruk około 6,09 €–7,44 € nettoWstępna wycena jednego wariantu
Fits for Playmobil, printed in PLA with support
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
A coaster for your favourite tea mug, based on Picard's famous request of the Enterprise Replicators. I've included the colour change .gcode made with PrusaSlicer along with the normal .stl. I put some black self adhesive felt on the base…
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
Mount is print in place hinged design and is uses (2) 3/8-16 x 1 ¾" bolts for the clamp. There are two locations for a captured ¼" nut or bolt to attach various light duty accessories such as a metronome or a phone mount etc. Phone mount…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wall art, coaster: Early summer reeds (two colours) When the sun passes through the reeds on a summer evening. Who ever lived near some lake, knows that. Orange or yellow and black or nearly black other colour.
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
I made these seat backs for when you flip the seat to fit a 6" driver. Flipping the seat makes the driver fit better but leaves the back open.
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: Buddha mini beads for attaching to twine or a thin elastic band, as a necklace or bracelet. Size: approx. 10mm wide, each with 1.5mm holes. As you will probably need several, I have prepared a dozen. Material: PLA Layers: 0.2mm, (or…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
We used Slicer Goodies on here to make the lettering and not sure where we got the blank plant label from. Hope every one likes it. Look at all the other plant labels in our collection.
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
have you heard of the “morning” “news” show It's Too Early, from Pixel Circus? the Hosts are the ever adorable squeeky gremlin that is Saige Ryan, and the bestest elder Millenial Anthony Carboni, as well as the executive producer Dagger…
Wydruk około 2,23 €–2,72 € nettoWstępna wycena jednego wariantu
pearls around base
Wydruk około 0,99 €–1,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Custom test Swatch of Atomic Filament Pearl Blue Print instructions 205c at 0.2 layers
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
A comical sign for those guys who really know who is the boss. Seems a number of females have have asked for a copy. Open as project in Prusa Slicer (change colours etc) or use the bgcode
Wydruk około 2,88 €–3,52 € nettoWstępna wycena jednego wariantu
Ich habe mir die PEARL Full-HD-IP-Kamera gekauft, um den Drucker über Handy überwachen zu können. Anfangs stand die Kamera auf einer Rolle Klebeband, um in der richtigen Position zu sein. Das war mir zu hässlich :-) Also habe ich mir mit…
Wydruk około 3,67 €–4,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
“Perlen-Flaschen” Organisierer zum Tragen
Wydruk około 1,49 €–1,82 € nettoWstępna wycena jednego wariantu
This is a frame front for the Light Box to display different logos, slogans, or designs on an office desk or wherever else you choose. See the Light Box design here . Go to my profile to see the additional frame front options to print for…
Wydruk około 3,48 €–4,26 € nettoWstępna wycena jednego wariantu
Update 2024-04-26 I updated part A1 to fit better to A2. Print instructions I used Prusament PLA Galaxy Black at 0.1mm layer height with gyroid infill. List of Parts Glue: https://amzn.to/4aoDkRE Step 1 Parts needed: A2, M1, M2, M3, Y1…
This is a printable model of the Black Pearl. I do not reccomend printing it with fdm printers under 150 percent scale, while possible, it will make the supports next to impossible to get off the railings. Also when you print them, build…
Easy to print roller for forming perfectly round pearls for making jewelry, decorations or for children. Ideally suited for use with polymer clay. But also suitable for fondant or children's modeling clay. In 100% size, the Snowman has a…
Easy to print roller for forming perfectly round pearls for making jewelry, decorations or for children. Ideally suited for use with polymer clay. But also suitable for fondant or children's modeling clay. In 100% size, the Spheres are…
This is a small trophy with a blocky design. At full-size, the trophy cup inserted into the base is 12 cm tall. The cup of the trophy fits into the base with 0.2mm gaps on all sides, for a total of 0.4mm X and 0.4mm Y. Glue is optional,…
Heyho Here I have various beads that you can use to make necklaces, bracelets or other decorations :) Scalability I used a 1mm thread. Theoretically, however, threads up to a thickness of 1.6 mm should also fit well. The larger the…
I repaired the model with 3d builder as the model had impurities, and i also split the model in half with also flag separate for easier print and glue with blender. Next up is to make sails thick enough for a common 0.4mm nozzle to be…
M3 Half-Track early Dimensions : 185mm x 70mm x 65mm Impression en PLA : 0,1mm et 0,2mm Chenilles et galets mobiles Assemblage des pièces fixe avec de la colle (Pattex Spécial Plastique) Chenille composée de 48 maillons relier par fil de…
Hello! I'm offering this set entirely for free! It is intended as a demo of what the rest of my line of digital files looks like, so I do hope you give it a try! Upon downloading these files you will find, as always, a complete…
Char Sherman M4A1-Early echelle 1/33 Tourelle et canon mobiles Chenille et galets mobiles Assemblage des pièces fixe avec de la colle (Pattex Spécial Plastique) Impression en PLA Chenille composée de 76 maillons relier par fil de fer…
The Grumman F-14 Tomcat is an American carrier-capable supersonic, twin-engine, two-seat, twin-tail, all-weather-capable variable-sweep wing fighter aircraft. The Tomcat was developed for the United States Navy's Naval Fighter…
A stealthy tracker with the best nose in the game. Collect them all! Check out the FULL COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Designed to print with Tree Supports on build plate only for EZ…
Fits perfect with: https://www.printables.com/model/1116011-minecraft-lantern-lightlamp-no-supports-with-clear https://www.printables.com/model/1107162-minecraft-lantern-lightlamp-no-supports Dont forget to use no encasing and…
FigBash is a digital action figure kitbash system. Create the action figure of your dreams by selecting its features, from hairstyles to clothing! These are 3.75 inch action figures, and options to scale the figure will be added over…
I decided to re-do my design of the Tiger 1 E, this time to an Early variant. I re-did the road wheels and added tracks on the front. The classic cupola is added, along with the feifel filters and the smoke launchers. Small changes…
Pissed off with another cleaning of spilled silicone gel balls - I quickly made a funnel for filling containers. Two versions - one printed straight, the other in vase mode. The normal version takes a little over 20 minutes to print but…
Against all odds, Pearl found her way into Belle's and Sam's hardened hearts thanks to her disarmingly warm nature. Besides, who can resist chocolate cookies?
Every color has a different height so if you're crazy enough and have enough colors of filament you can do a color change 6 times on the last layers as seen on the screenshot. (I'm not crazy enough lmao) Use 0.2 or 0.1 layer height. Enjoy!
gtag early access badge
Scanned with my DIY 3D Scanner and processed in MVE, for more details on the scanning process and the (printable) 3D Scanner see: https://www.thingiverse.com/thing:2755968 Finally, there is a website, where I will bundle all the…
Bambu Lab Bambulab AMS Dryer Trockner Silicia Pearls
A model based on a Pearl Philharmonic snare drum. It's not a real drum.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Daddy Earl Sinclair from TV series Dinosaurs 8cm Thank you for downloads, likes… Enjoy !
Makes swapping batteries a lot simpler by keeping the body connected to the chassis. Uses the stock mounting points. Replaces the rear bumper mount and the mounting bracket connected to the roll cage on the body. 2 additional M3 holes are…
Why do you need that? I don't know, my girlfriend wanted it, so I made it for her! Nearly everything is 3D printed, you just need these part: 6900 Bearings (x6), can be 3D printed, but won't last long Clamps (to clamp it to a desk), I…
Boeing 737 Airborne Early Warning and Control This is a printable model of Boeing E-7 AEW&C aircraft. You may need to scale. The pictures uploaded printed at half scale. Too much scaling can be destroy some parts, you should be aware of…
Putting it at 4000% size should make it easier to work with. This model was contorted a bit in the rendering and lost a lot of detail.
This enchanting 3D mermaid model features a graceful sea princess sitting on a soft cushion inside a seashell. With flowing red hair, a purple shell bikini, and a shimmering turquoise tail, she brings fantasy to life. Perfect as a…
You will need some longer 3mm x 20mm length screws to make this work. The original screws are Torx T10 security heads. Luckily Harbor Freight sells a set of security bits needed to remove them.
These are dice and chip storage trays for the Gearlocs in the board game Too Many Bones. Sliding lids for the trays are available in a separate posting at: https://www.printables.com/model/511136-too-many-bones-gearloc-storage-tray-lids…
Included 3mf file for print orientation. Either add dowels with your slicer or use some super glue too attach the base. Or just use the figure scaled way up for wall art. If you're happy with the design, and had a successful print, AND…
The two "halves" of the wheel, as well as the two pieces of the pedestal can be adhered using a small amount of CA glue.
This is a reupload of a beautiful model from Thingyverse. Created by graph . --- Small lamp > big impact! This Voronoi Pearl Light Lamp is a beautiful decoration and lamp. Through the voronoi-parts, the light casts a beautiful light and…
AUW: 45.5g Battery: 150mah 1s Servo: 2x 1.7g rotary servo Receiver: RX42 Tailboom: 3mmx2mmx400mm carbon tube Wing spars: 6x 1mmx400mm carbon rod Instructions coming soon. It should be possible to reverse engineer from the photos if you're…
Inspired by round ‘rose’ cathedral windows, this clothing button contains a puck of imitation mother of pearl made by printing silk PLA on a glass bed with a hilbert curve as the first layer fill pattern. This was then coloured with…
Full Image Catalog The complete gallery of my works can be found at Portfolio. You can search by the file’s reference number or simply click the preview image to open it directly. This Luffy model features the iconic pirate captain with…
PARTS LIST: Motor: https://www.amazon.com/dp/B0BB2V8PNK Hardware Kit #2: https://www.amazon.com/AvrestYPT-Stainless-Assortment-Phillips-Electronics/dp/B0F8V7G8T8/ref Hardware Kit #3…
My contribution to the “Pearls” competition I have adapted one of my designs for a pipe so that it can be used as a pearl. Unfortunately, some of the original design was lost during the scaling process. The lower openings are designed so…
This small Santa hat–shaped fidget isn’t just eye-catching, it’s also a delightfully playful accessory for the holiday season. The model consists of two separately printable parts that can be easily snapped together after printing—no…
These are sliding lids to accompany the Gearloc storage trays for the board game Too Many Bones. The storage trays have been posted separately at: https://www.printables.com/model/511137-too-many-bones-gearloc-storage-trays. Each Gearloc…
Basket to replace the one that comes with the Pearl/Supreme/Janta watch cleaning machine. For file "Basket_v1" The hooks at the top have to be cut after it's printed. But this requires no supports. "Basket with L" requires supports to…
Scale cannons for use in a huge model of the Black Pearl that its building a friend of mine. Print Settings Printer: Bq Hephestos Rafts: No Supports: Yes Resolution: 0.20 Infill: 20% Notes: use smal nails to attach "sobremuñones" to…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a D20 dice, which I made specifically to follow certain design rules. As with any good standard D20, the opposite faces always add up to 21. With my design, the ordering of the faces also alternates low & high, so that low numbers…
Want to save some space? Stand your Mac Mini up vertically! Mini locks into the stand and can't be slide out from the back or front and can only be lifted out. Even has cutouts for the cooling vents! Works with G4 and Early Intel Mac…
There are my first sculpts using Blender which I decided to do of those funky aliens ToeJam & Earl! I absolutely played this to death in my youth so lots of good memories of the game! :) I would love to see anyone else's prints so feel…
Bmw E30 - front seats sleds nut cap, for early model after 09.1985, and late model. OEM-number: 52 10 1 941 999 Reproduced from the dimensions of original part. Fusion360 source-files (*.f3d) attached.
Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page. Are you ready for another adventure? Hop aboard this intricately detailed…
Juste print it ;) edit : add fiew sizes. edit : chamfer the sharp edges and add a bigger version edit : add a 10 dots version for the bigger ring and change the name of the model
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
My friend Julian from Instagram created a nominated and winning ai-generated image for the contest "My Girl with a Pearl" from the Mauritshuis Museum in The Hague/Netherlands. You should definitely check out his Instagram:…
A single piece printable Stagg EKG stand with room below for the Acaia Pearl scale. There are a few other designs that accomplish a similar outcome, however what I have found is that they either require non-3D printed parts or gluing…
This is a very early exercise in Packout accessories. I do not have a Packout to test these components with, so I'm hoping some of you do and can give me feedback. What else would you like to see to make a Milwaukee Packout 3D printers go…
Huge thanks to my friend Demetrius for giving me his ⅓ scale federal gearbox model! All credit goes to him for that. Right now this only has the 10/12 variant, but I will later be adding single tone 12, 8, and dual tone 9/12 variants as…
The Black Pearl from Pirates of the Caribbean
Replacements for lost or broken nylon cymbal stand bushings on Pearl 900 Series-compatible stands. Modeled closely on the originals, with a few design changes for 3D printing. They work the same way and accept the original screw. Fits:…
Taylor Swift funko, print in 0.12mm supports required. Printed in FDM, 0.12mm with 0.25 nozzle. supports required, can be printed in one pice. Can be printed with 0.4 nozzle, but need more work to get a good surface for priming and…
A late 80' / early 90's F1 Car NOTE : I haven't printed this model yet, it might need a few adjustments in your slicer. (from what I've seen in my slicer you might need to take off 0.1mm from the bottom)
These two representations capture William Marshal, 1st Earl of Pembroke, in the height of his 12th-century glory, serving as a tribute to a man who rose from a landless younger son to the Regent of England. These models highlight the dual…
Fearless (Taylor's Version) Lithophane made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
This Montessori math block set is a hands-on educational tool designed to enhance children’s autonomous learning of basic math concepts. Each block’s height represents its numerical value, allowing children to visualize and compare…
Change History Update (9-02-26): Fixed a tolerance issue between the hour plate & alidade. The fix is found under: PG_heliochronometer-hour_plate_assemblyv2.3mf & PG_heliochronometer-hour_platev2.stl Update (31-03-26): (Optional…
I designed a rotor for a watch cleaning machine. It works with Pearl/Supreme watch cleaning machine sold on Etsy and elsewhere. It is designed for an 8mm shaft. The Pearl has a 3/16 shaft, but it is machined down to 8mm where it connects…
And here we are again with a random 3D scan test. This time of a figure coming from one of those "you dont know what is inside" boxes from Tengen toppa gurren lagann I bought ages ago. This thing needs supports hardcore. if you don't have…
![(HORNS!!) [EARLY ACCESS] New Thunderbolt Chopper Assemblies!!](https://media.printables.com/media/prints/3f4653c9-4550-43d9-b6aa-fb756891380c/images/12752842_c82c420d-1cc6-4372-83f0-147d1d76946d_2b9a421a-ef35-474e-82d9-2203fb117fe5/screenshot-2026-04-24-022112.png)
