1 / 8
ENDER 3 V3 SE/KE FEET (use the original Rubber feet)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Those are 30mm feet for the Ender 3 V3 SE and KE to improve the motherboard and PSU cooling. They use the original…
- Ocena
- 5 / 5
- Polubienia
- 125
- Pobrania
- 542
- Wydruki
- 4
- Wyświetlenia
- 4346
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 4) (Komentarze: 15)Remiksy (1)Kolekcje (197)Powiązane
Those are 30mm feet for the Ender 3 V3 SE and KE to improve the motherboard and PSU cooling. They use the original rubber foot.
You can print them in two parts per side on the ENDER 3V3 SE/KE or in one part per side on a bigger printer
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
0,36
Post-Printing
For the installation you will need:
4 M3X30mm screws
2 M3x 14mm screws
Category: 3D Printer Parts