1 / 5
OpenRC F1 2023 Car - air vent inlays
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed inlays for the air vent intakes
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 1619
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (36)Powiązane
I remixed the “OpenRC F1 2023 Car - Full Part Set”, I desinged quick and easy to print inlays for the air vents of the F1 car.
Update 7-11-2023
Added an inlay for the back
Print files
- Front_vent
- Front_vent_mirrored
- Top_vent
- Back_vent
Print settings
- Printed on my prusa mk4
- Printed with Input Shaper (structural)
- Printed with .15mm layer height
- Printed with .4 nozzle
- Printed with PLA
- Printed without supports
- 15% infill
Additional info
- If printed with Input Shaper I recommend printing in the structural preset. This way the part is stronger and will last longer.