USB Keeper for XBox 360 Wired Controller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Securely snaps over the connection point between the round end, and the USB adapter so you can't lose it.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
When I retrieved my XBox 360 Wired Controller from my box of electronics to use it for some retro PC gaming, the proprietary round to USB adapter was gone and the controller was useless to me until I was able to find it again.
Once I found it, the thought of losing it again terrified me, so I designed this “USB Keeper” to securely snap over the connection point between the round end and the USB adapter to prevent them from getting pulled apart.
Recommended Print Settings:
- PETG
- Perimeters: 99 (for strength)
- Generate support material: Checked
- Style: Organic
- Support on build plate only: Checked
Feel free to use File > Open with the attached 3mf file to get the above recommended settings automatically. I used PETG, but PLA will probably also work.