Print In Place Instant Photo Frames
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print in place photo frames designed for Fujifilm Instax and kodak 3x3 4pass formats. Designed to be mounted 3 ways.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 75
- Wydruki
- 1
- Wyświetlenia
- 509
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Print in place photo frames designed for Fujifilm Instax and kodak 3x3 4pass formats.
Designed to be mounted 3 ways.
- Magnetic: Press 5mm (2/10") magnets into the holes to mount on magnetic surfaces.
- Flip the print in place kickstand out to display on a desk at a 70 degree angle
- Use the key hole mount feature to hang on a small nail or screw
Print Instructions:
I've used PETG for my testing, I think it will work better as a living hinge than PLA, but PLA should also work.
No supports needed, stock non-input shaping profiles. I find IS on my printer makes quality take a minor hit.
My printer is a 0.6mm nozzle Prusa Mini+ so in that case use 0.3mm layers and the stock profile. This should also work for 0.4mm nozzles, just use 0.15mm layers (the living hinge in that case will be 2 layers).
After print instructions:
- Press in magnets if you're doing that
- Flip out kick stand if you're using it to stand on a flat surface
- Place photo in front half
- Fold shut and press closed
- After pressed together make sure to crease the printed hinge against the leading edge so it doesn't put constant opening pressure on the frame