Print In Place Instant Photo Frames
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print in place photo frames designed for Fujifilm Instax and kodak 3x3 4pass formats. Designed to be mounted 3 ways.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 75
- Makes
- 1
- Views
- 509
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
Print in place photo frames designed for Fujifilm Instax and kodak 3x3 4pass formats.
Designed to be mounted 3 ways.
- Magnetic: Press 5mm (2/10") magnets into the holes to mount on magnetic surfaces.
- Flip the print in place kickstand out to display on a desk at a 70 degree angle
- Use the key hole mount feature to hang on a small nail or screw
Print Instructions:
I've used PETG for my testing, I think it will work better as a living hinge than PLA, but PLA should also work.
No supports needed, stock non-input shaping profiles. I find IS on my printer makes quality take a minor hit.
My printer is a 0.6mm nozzle Prusa Mini+ so in that case use 0.3mm layers and the stock profile. This should also work for 0.4mm nozzles, just use 0.15mm layers (the living hinge in that case will be 2 layers).
After print instructions:
- Press in magnets if you're doing that
- Flip out kick stand if you're using it to stand on a flat surface
- Place photo in front half
- Fold shut and press closed
- After pressed together make sure to crease the printed hinge against the leading edge so it doesn't put constant opening pressure on the frame