Counting matching models…
I tried the other available models in my camera, but they were far too large to allow the door to close. I also noted that the bottom portion of the cartridge had a raised section (to mirror the top) which seemed to be unecessary in the…
This is a modification of Volzotan's excellent model but for Kodak Funsaver 11mm Lenses. I would highly suggest checking out Volzotan's video on his process: I would also suggest checking out this video by George Moua on how to remove the…
I use https://www.thingiverse.com/thing:4597246 base to make a Kodak FunSaver lens to Sony E-mount, kida like this How to Make a Lens from a Disposable Camera (90s film look) - YouTube but looks better. it can printed without…
A simple cover for the lens and flash. The 1,5mm hole can be used to tie the cover to the bar on the camera body. PRINTED USING: Layer height: 0,2mm Line width: 0,4mm Bottom layers: 3 Walls: 3 Update: I've added the f3d-file just in case…
A lens cap for your Kodak H35! There are 2 versions of the model, one is just the lens cap and the other is the lens cap with an arm that covers the viewfinder; This works as a great reminder to take the lens cap off before shooting. I…
This is rambros ' excellent EMD MP15AC model for Dragon Railway , remixed with an Eastman Kodak #10 livery to print on a Bambu AMS. This contains the new files for the EKRR livery, the rest of the parts and full assembly instructions can…
Mount your Kodak Charmera on a hotshoe. Access the USB-C port on both versions while the Case only version also has SD slot access. Supports optional, but recommended for the best finish around the button access.
I did file the two little plastic pieces to have flat surfaces. The viewfinder probably has a field of view of 35mm.
Store up to 6 Kodak 35mm film rolls in their canisters. Caution: designed to fit Kodak 35mm canisters. Compatibilaty with other brand film canisters is unknown, but you can always just put the film roll without the canister in the case if…
Re-upload from https://www.thingiverse.com/thing:6678393 Designed by Photochemicals. Please refer to the thingiverse link for instructions!
Nozzle: 0.4, layers: 0.2 . This is a prototype, I will not develop it further, because 3 adapters work perfectly for me. You also need springs, sheet metal, sheet metal scissors, a file, sandpaper, a screwdriver and small screws and…
This is a custom-designed protective shell for the Kodak Chamera (Mini Camera). It is designed to fit the camera's dimensions perfectly, offering protection against bumps and scratches. Key Features: Secure Locking: Features a built-in…
I didn't know of any available adapters for these unusual lenses, so here one is! The smart little Kodak Cine-Ektar 25mm f/1.9 is the only one I have tried, but the coverage on a Four Thirds sensor is pretty good and it is quite usable. I…
I am a amatuer photographer and shoot mostly on Kodak so I made this after an old Kodak sign. There are 2 versions, the normal one, and one with a small hole on the Back to hang it on a wall. If you have an multi material Printer, or take…
A lens hood for Retina Ib, IIc, IIIc, IB, IIC, IIIC & the original Retina Reflex. It mount via the bayonet, it holds firmly and is easy to mount and dismount. It is modeled after the original accessory bayonet mount hood, (push-on hoods…
the ESP32CAM is very popular, but I found a version with the CH340 and micro usb port included, so with this version no need to battery shield. this PCB is a little bit longer than the stadard one, so I had to create a new design to match…
The part that engages the film to rewind it on my Kodak Ektar H35N broke. This is a simple printable replacement. Print orientation I printed mine laying flat, because I was worried about the part being weak because of the layer line weak…
Kodak Charmera Handheld
Mirrors and lenses from a Kodak Autographic are fitted into a 3D-printed housing. The cold shoe is designed for Minox but is compatible with many other cameras. The Kodak Autographic waist-level viewfinder is large and works perfectly for…
For Kodak camera found at DM in Germany.
I love shooting medium format and wanted to have a nice Container for my films, so i designed this. You can print the container with the Kodak logo or just blank. The same goes with the top, there is a blank, a "Keeping Film Alive"…
Scanning old family films I inherited, I ran into a few of the infamous Kodak discs. I couldn't find a holder that had been created with DSLR scanning on a copy stand in mind, so spent a bit of time in Fusion to come up with this. I've…
Here is the help for those who know the problem! Gears: Nozzle: 0.2 Layers: 0.16 Speed: Slow! Material: Harder PLA ( If you are very brave and your printer is very precise, then try it with a 0.1 nozzle. ) :) Other parts: I trust you You…
This design is an aftermarket solution to increase the speed of loading and scanning some older projector slides. This design does not include guiding rails, so as to allow for manual adjustment for non-standard slide sizes/positions.…
The model should be printed with 0.4mm layer width. Use Kodak (not Ilford or FujiFilm) film canisters to store SD cards. This organizer can fit up to 4 SD cards, 4 micro-SD cards, and a small USB flash. Spring at the bottom provides cards…
Small standing picture frame to fit the Kodak Mini Shot 2 photos (2.1x3.4"). My wife got one of these to print her photos, and I couldn't find any frames I liked, so I made one! Print in two pieces and has a small tab to allow for…
With these 3 parts you can mount your Kodak Luma 75 projector upside down on the ceiling. The captive screws allow you to adjust the tilt. The ceiling plate fastens to the ceiling. First; attach the projector mount to the projector with a…
This is a very simple and easy to print lens cap for the Kodak Ektar H35! There are two variants, one adorned with Kodak's logo as well as a blank version! Simply print and install!
Kodak Charmera Hat Clip Mount, to use as a cheapo Go Pro! Printed in PLA
Bring your favorite designs to life with this high-quality 3D printable LED Light Box STL from GIVEMHEVN This layered light box is designed to create a clean, professional display when illuminated using an LED light source. The…
After almost two years of development I recommend you check my up to date design if you interested in such subject. www.thingiverse.com/thing:4540492 This is a test of concept for converting Point and Shoot lenses to M39 mount. It can be…
My wife and I wanted to project movies onto the ceiling so we could watch them from our bed. So I made a mount for a KODAK Luma. It's made for a 33.9mm thick headboard but could be adapted pretty easily for other beds (Fusion360 file…
Does not need any opening/dismantling/cutting of original holder, as per original linked instructions! (see below). Fits around internals, see pic. Can scan first two one way around, then spin 180 degrees and scan the last two. Tops stays…
Model that you can use to design accessories etc
Description This is my fully 3d printed Kodak Charmera case. It uses a cam shaped latch that presses on the side of the Chamera, keeping it locked in place. Additionally, there are 17mm x 0.75 threads to allow typical mobile phone lenses…
Printed using PLA with supports.
I bought this camera at a yard sale, and it did not have anything to protect the lens so I made a quick model, added the logo, and printed it on my Prusa mini. Print with a 0.4mm nozzle for higher resolution.
Replacement holder with a quick print Features: Secure fit for Kodak sensors Ergonomic shape for easier positioning Compact, lightweight design Quick, support-free print Material & Sterilization Notes Recommended materials: PETG – good…
Firstly, amazing design by Zack Byrd! In this remix I have made it in such a way that it is easier to insert the camera into the case and also made the charging/data transfer port accessible. This helps with transferring of images/videos…
This is to fit the: Kodak 35 mm U-Core 2 inch / 52mm film core/spool and 400ft to 100ft Bulk Film Respooler by @MaslovyRohlik originally the [Thingiverse] 400ft to 100ft Bulk Film Respooler by @broken_perfectionist This is a handy device…
This is a part for the heaping POS called the Kodak Portrait This corrects the problem of the spring being too weak to sit the nozzle back properly. I had printed a spacer to increase the load in the spring to ensure the nozzel seats…
A very very simple adapter to fit a Kodak Series 6 filter clamp onto and Ektar h35 or h35n. Pretty much any print settings will work. TPU might be better, but I haven't tested it.
I modified a parametric box and created an insert for the box to hold a Kodak Easyshare M380 camera, its power brick and cord, a 3D printed tripod, and an SD card. I printed it on my BambuLab A1 with no supports and it works very well. I…
Simple lens cap for the Kodak Brownie Hawkeye. The cap covers all three elements. I appreciate any support you can give. It helps motivate me to continue sharing my creations.
This holds the packaging of the Kodak Zink Photo Paper©
you will need a Ni-MH/Ni-Cd battery charger, there are plenty cheap ones for RC cars. You will also need 2 uninsulated male spade connectors (standard size, roughly 6.3mm wide), hot glue or preferably epoxy to hold it in place, and wiring…
The spindle for the paper spool for my Kodak 6850 Photo Printer was missing, so I designed this replacement part. I didn't put much polish into it, but wanted to share it anyways. You need to manually split the .step file into the 4…
openGrid photo frame for Kodak mini size photos - 5.3 × 8.6 cm (2.1X3.4") Uses openConnect system on the back. Frame fits at least 3 photos if you want to rotate them.
Not much too this one - it's a lens cover for the Brownie Target Six-20 box camera. My main motivation for making this was to prevent accidentally exposing the film while transporting the camera, and not so much "protecting" the lens, as…
A simple screw-in lens cap for Kodak Signet 35, to protect the excellent 44mm f/3.5 Kodak Ektar Lens. Available in 3 functionally identical variants: - Plain - with Period Correct logo - with Classic EKC logo Thread spec is M26.5x0.75…
Replacement for the finger of a Kodak i65 Paper Sensor
Simple lens cap for the Kodak Brownie Starflex. I appreciate any support you can give. It helps motivate me to continue sharing my creations.
Print in 0.3mm black PET, cut through outlines
I designed this model to protect the Brilliant viewfinders on the Kodak SIX-20 ‘BROWNIE’ C from damage, since they protrude from their mounts but the 'BROWNIE' D, E and F seem to have the same viewfinders so it should also work with them…
Use this small cover to avoid accidentally pressing your Kodak Ektar H35N's shutter button. Might also fit the regular H35 (not tested). Slide it on the corner where the shutter button is, and it should stay in place by friction. If you…
Mount your Kodak Charmera on a hotshoe. Access the USB-C port on both versions while the Case only version also has SD slot access. Supports optional, but recommended for the best finish around the button access.
Just a 35mm film holder, holds 3 rolls. I cut some thin foam and glued it to the bottom of the main body. This helps reduce any rattle printed using PLA, shrinkage from other materials not taken into account
This is a digital 3D printable model of Sakonji Urokodaki’s Mask from Demon Slayer . 👺 Color-separated pieces (multicolor printer not needed) and rubber band attachment included. 📦 Included Files STL (separate and whole for 200mm printer…
NOTE! This is a super small and fine gear. 1x1xa0.5cm approximately. Normal 0.4mm nozzles wont cut it usually. You either need a 0,1-0,2 or a SLS, SLA etc printer that can achieve those resolutions. Small key-files might be required for a…
The Kodak EKTAR H35 is a great little half-frame shooter, but it ships without a lens cap, which is kind of wild for a camera you're tossing in a bag. This is a simple snap-fit replacement that keeps your lens clean between rolls.…
Dice tower in KODAK Film design. You definitely need supports. If you split the print file at the lid (in your slicer), you might just need the supports for the dice tray part. If I have the time, I'll make a version where the Lid is…
I tried the other available models in my camera, but they were far too large to allow the door to close. I also noted that the bottom portion of the cartridge had a raised section (to mirror the top) which seemed to be unecessary in the…
This is a lens board for my Miniature Speed Graphic to fit a Kodak Zoom Ektanar C 102-152mm f/3.5 designed to fit a Kodak slide projector. The lens has been modified by cutting off around an inch of the rear of the barrel. It does not…
This is a lens board for my Miniature Speed Graphic to fit a Kodak Anastigmat 130mm F/6.3 sourced from a Kodak Vigilant Six-16 camera. It would need modification to fit a 2x3 Graflex that takes a rounded lens board, but as I do not have…
Kodak ZINK Instant Photo Storage Box (Parametric) Keep your Kodak ZINK instant prints organized, protected, and dust-free with this 3D-printable storage box . ✨ Features: ✅ Parametric Design – Adjust the number of slots to fit your photo…
Show off your love for nostalgia with this Kodak logo keychain! Perfect for photography enthusiasts or anyone who appreciates the timeless charm of the iconic yellow and black design. Whether you want to add a retro touch to your keys or…
I was disappointed to find that my new shockproof camera did not include a lens cap, so I made one. This is designed to latch onto the back of the flash, so it will likely not work unless printed in some flexible filament like TPU. It is…
Use this small cover to avoid accidentally pressing your Kodak Ektar H35N's shutter button. Might also fit the regular H35 (not tested). Slide it on the corner where the shutter button is, and it should stay in place by friction. If you…
Remove any blobs after printing to improve fit and avoid denting the paper casing of an old slide. Remove any film negative holder from the Kodak RODFS50's caddy. Place this inside the caddy: Line up the tab with the indent on the left as…
This tripod mount allows you to keep the Charmera steady while taking videos with it or even capturing multiple pictures to stitch together into a panoramic photo. I've created both a vertical and horizontal Arca-Swiss version to…
Just a 35mm film holder, holds 3 rolls. I cut some thin foam and glued it to the bottom of the main body. This helps reduce any rattle printed using PLA, shrinkage from other materials not taken into account
This is a digital 3D printable model of Sakonji Urokodaki’s Mask from Demon Slayer . 👺 Color-separated pieces (multicolor printer not needed) and rubber band attachment included. 📦 Included Files STL (separate and whole for 200mm printer…
NOTE! This is a super small and fine gear. 1x1xa0.5cm approximately. Normal 0.4mm nozzles wont cut it usually. You either need a 0,1-0,2 or a SLS, SLA etc printer that can achieve those resolutions. Small key-files might be required for a…
The Kodak EKTAR H35 is a great little half-frame shooter, but it ships without a lens cap, which is kind of wild for a camera you're tossing in a bag. This is a simple snap-fit replacement that keeps your lens clean between rolls.…
Simple lens cap for the Kodak Hawkeye Instamatic R4. I appreciate any support you can give. It helps motivate me to continue sharing my creations.
After finding out that you can use the Kodak Charmera as a webcam, I made a mount that allows the Charmera to sit on monitors. By simply plugging the Charmera into your PC, it acts as a webcam and gives it another use. Assembly Glue the…
Push on lens hood for Kodak Retina IIc and IIIc 50mm lens cameras. PLA 210/60C. PETG 235/70. Use gaffers tape provide a more snug fit. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.16…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4hriEmwUDbP The Base was produced in Fusion 360. I am just learning how to use it. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
This Lens cap cover is designed for the Clip Mount Lens set made by Kodak.
Print aligned so the long side aligned with the bed movement. The STL should be oriented this way, as is. See screenshot for example.
The KODAK SLIDE N SCAN is a small film scanner that offers scanning of 135 (35mm), 126, and 110 film as well as 35mm slides. It is one of the few slide scanners that offer scanning of 110 and 126 film sizes which were very common formats…
An easy to use slide on protector for your Kodak Ektar H35 :)
This is a handle for a 1947 Kodak Duaflex camera. I've uploaded it here for the two or three other people in the world
Break this arm under normal use and was unable to get a new one? Me too. This arm got me by for a long time without much problems while I was working on cutting one from aluminum. You may need to head up the ball bearing and work them…
The is a replacement for the single "carbon canister" supplied by the manufacturer. Since they do not sell or support their product in any useful and meaningful way I needed to come up with this. This Part features a refillable activated…
Allows you to use Color Filters for the Kodak 35mm camera when the flash is turned on. Included is a template to help you cut the color filters into shape as well as something to hold them. The template has a hole so that you can align it…
