KODAK Portrait BLtouch Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a part for the heaping POS called the Kodak Portrait This corrects the problem of the spring being too weak to…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a part for the heaping POS called the Kodak Portrait This corrects the problem of the spring being too weak to sit the nozzle back properly. I had printed a spacer to increase the load in the spring to ensure the nozzel seats properly after probing. However, it created an issue resulting in the bed appearing to have a sag due to the probe distorting the bed during auto bed leveling.
2x m3 Brass inserts and 2x m3 10mm bolts required
Use washers or modify as needed.
This printer has been changed over to a duet3 mini 5+ from the original smoothieboard/kodak handcuffed slicer setup
Print Settings
Printer:
KODAK Portrait
Rafts:
No
Supports:
Doesn't Matter
Infill:
40
Filament: Matter3d PETG Black
Category: 3D Printer Parts