Kodak DCS 5XX/6XX/7XX & Canon D2000/D6000 Battery Holder/Charger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Battery holder/charger for Kodak DCS cameras.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
you will need a Ni-MH/Ni-Cd battery charger, there are plenty cheap ones for RC cars. You will also need 2 uninsulated male spade connectors (standard size, roughly 6.3mm wide), hot glue or preferably epoxy to hold it in place, and wiring and whichever connectors are most convenient to connect to your charger. My charger had a tamiya connector and i had a spare one so I used that but there are plenty of options. Make sure positive and negative are orientated as shown in the picture and you should be good to go. I've only used this with 1 "new" aftermarket battery and my Kodak DCS 520, but as far as I know the 5XX 6XX and 7XX cameras all used the same battery form factor so it should work for them as well.