1 / 4
Sovol 06 Seperated Display Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount to separate your LED control screen from your SVOL06 printer.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I have my 3D printer right next to my desk, but because it sits lower I couldn't see the screen.
I have remodeled another user's mount.
I recommend securing it with 4x small screws that have sharp edges (Not the ones that come with the printer - has a flat end and doesn't screw in).
I used supports for where the cord goes through (The original maker said that no supports were necessary but I didn't want to risk it).
Standard Layer height - 2.0mm
Let me know if you have any questions :)