RDM/DMX-Splitter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created this housing for a minimal size RDM/DMX-Splitter for my toolcase
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 485
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Open Community License v1
I created this housing for a minimal size RDM/DMX-Splitter for my toolcase. The housing containst this pcba and is powered by USB-PD with 12V (I use these trigger pcbas).
Due to size restriction the cables need to be soldered on to the pcba.
I used three pieces of transparent petg as light conductor and the filter-button can be accessed with the button piece.
The XLR-connectors are mounted with M3x5mm sink head screws, the pcba is mounted with M3x5mm cylinder head screws and the UCB-C-PD-Trigger is mounted with an M3x8mm cylinder head screw. For the lid I used M3x8mm sink head screws.
============================================================
RDM/DMX-Splitter PCBA: https://www.dmx4all.de/produkte/dmx-splitter-4-rdm/