Foil roll-in-box holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for the Kirkland foil dispenser box to allow the roll to rotate in the box.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
We dropped the box of kitchen foil and it broke the internal plastic stands that let you unroll the foil without removing it.
I designed this to replace the stock ones using minimal plastic but having enough strength to hold the roll.
Designed for the Kirkland food service foil which has an internal box measurement of 100x100mm.
I designed the part that inserts into the tube at 25mm diameter as the tube on mine was squashed after the drop.
I printed in PLA with 4 perimeters using a 0.6mm nozzle. I'd recommend you keep the perimeter count high to retain strength.