Organizing drawers for Kallax
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small drawers that fit perfectly into a compartment of a Kallax shelf from IKEA. Ideal for screws, electrical parts, etc
- Ocena
- 3 / 5
- Polubienia
- 63
- Pobrania
- 138
- Wydruki
- 0
- Wyświetlenia
- 2203
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print the 4 body parts and glue them together. The thick walls should be on the outside. Stick felt pads or other squishable material onto the side and the bottom and push the entire body into the Kallax compartment. The body should not move to easily as that might cause problems later on when opening the drawers.
Print 48 small and 8 big drawers and as many dividers as you need.
You can print the blank label und write on it by hand (a piece of carboard would work to) or use your favourite CAD program or the Prusa slicer to create your own labels.
Note: I only used white for the bottom layers and the last 20 mm because I was running low on white PLA and didn’t care what the area that you won’t see looks like and didn’t care for the other filaments anyway.
26.02.2024 Note: I included versions of the small drawer that can be divided into 3 compartments. There are 2 different designs. One that can still be dividet into 2 compartments and one that can only be divided into 3 compartments.