Garage for @fixumdude PIP Cars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Every car needs a garage, so this is my first attempt to design a garage for Fixum Dude's incredible PIP cars
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I already printed so many of https://www.printables.com/@fixumdude cars, these are such incredible models.
But somehow, they need to park somewhere. This is my first attempt or designing a garage for these cars. There is double and single version.
Should fit all the cars at the moment (Not the Big Rig from https://www.printables.com/@K2_Kevin)
Designed after the heighest (Ice Cream Car) and the longest (Concrete Truck). I forgot first about the Snow Plow which is longer then the concrete truck, but it also fits.
I'm very glad for some feedback, if you print it. Is something missing? Window?
Maybe I make another “eco” version with thinner walls, 5mm is a bit Overkill.
Printed the single version with the 0.2mm Sturctural setting with input shaper and just 5% infill and it was about 3h print time.
My Print Instructions/Settings
Orientation: On the Side
Supports: No (Maybe not yet ;-) )
Layer Height: Depends on how “fine” you want the entrance slope. I printed mine with 0.2mm.