Pipe plugs with threads for finial in gas pipe curtain rod - customizable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plugs to go into the end of a gas pipe so you can thread on a finial. Customizable for different pipe and thread sizes.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 435
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Updated 2025.07.31
We often make curtain rods from 1/2 or 3/4 inch gas pipe. You can cut the pipe to length and it usually doesn't need a center support. The plugs can be pounded into the cut end of the pipe to allow you to screw on a finial.
There are two STL files
- plug_.75pipe_12mmx1.25_thread.stl is for a 3/4 pipe with a finial requiring 12mmx1.25 metric threads
- plug.50pipe.25x20SAE_thread.stl is for a 1/2 inch pipe with a finial requiring 1/4 by 20 SAE threads.
I've included the OpenScad design files if you want to remake them with a different thread size.
Print Settings
Rafts:
No
Supports:
No
Infill:
20%
Notes:
Printed in PETG but I'm sure PLA would work fine as well.
Category: Replacement Parts