1 / 1
Pipe plugs with threads for finial in gas pipe curtain rod - customizable
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plugs to go into the end of a gas pipe so you can thread on a finial. Customizable for different pipe and thread sizes.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 89
- Makes
- 1
- Views
- 435
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Updated 2025.07.31
We often make curtain rods from 1/2 or 3/4 inch gas pipe. You can cut the pipe to length and it usually doesn't need a center support. The plugs can be pounded into the cut end of the pipe to allow you to screw on a finial.
There are two STL files
- plug_.75pipe_12mmx1.25_thread.stl is for a 3/4 pipe with a finial requiring 12mmx1.25 metric threads
- plug.50pipe.25x20SAE_thread.stl is for a 1/2 inch pipe with a finial requiring 1/4 by 20 SAE threads.
I've included the OpenScad design files if you want to remake them with a different thread size.
Print Settings
Rafts:
No
Supports:
No
Infill:
20%
Notes:
Printed in PETG but I'm sure PLA would work fine as well.
Category: Replacement Parts
