Creality K1 Independent Ledstrip Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With this model you can add a ledstrip to your k1 independent of lid riser
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 1051
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have a lid riser and want to improve the ilumination of your k1, the easiest way is just stick the ledstrip on the wall of the lid riser, but this bring a problem! If you need to do a maintenance isnt possible to remove as everithing is attached to the led strip power cable.
My solution is a support that fixes the LED strip independent of the lid riser.
Now, I can do the maintenance withou worry.
Print this model 4 times each.
Attach this model under de frame using the original screw
Recommended to buy:
1xJST 1.25mm male connector (2 pins)
1xJST 1.25mm female connector (2 pins)
https://pt.aliexpress.com/item/1005005961786030.html
With this connectors you can attach the LED strip while preserving its originality, without having to cut wires
Lid riser that fit in this model: https://www.printables.com/model/536359-creality-k1-riser-the-speedbump-closed-and-ventila
If you like my work, don't hesitate to support me by paying me a ☕. Thank you 🙂