1/10 - 1/14 Scale Jersey Barrier - Minimal Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1/10th Scale Construction Site Jersey Barrier. Only Needs Minimal Support for Printing. Can Scale down to 1/14th (71.4%)
- Ocena
- 0 / 5
- Polubienia
- 114
- Pobrania
- 452
- Wydruki
- 0
- Wyświetlenia
- 1797
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is a highly detailed 1/10th scale model of a 42-inch tall jersey barrier. This has also been printed at 1/14th scale (71.4% scale of supplied 1/10th scale model) with success to fit with Tamiya semi trucks and other RC construction vehicles.
The barrier consists of one main body with two press-fit plugs for the fill and drain ports. You may need to perform slight scaling of the plugs to ensure they fit into the barrier properly with a slight press fit.
Print Settings
2 Walls and 8% Gyroid Infill
Manual Tree Supports were only used in the four corners and one other section highlighted below: 
The rest of the overhangs were able to be printed without supports using bridging.
The two plugs have a small contact patch with the build plate, so a brim for those parts is recommended.
Included Print File
The included .3mf file is for Bambu Lab printers and includes prints for both 1/10th and 1/14 scale barriers.