Voron serial tag for V2.4 350
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a tag for my v2.4 as i did not really like any of the alternatives.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 77
- Wydruki
- 2
- Wyświetlenia
- 564
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I did not really find a serial number tag for my voron that made me truly feel amazed, so made my own!
It uses two extruders, but really has been printed with some macro shenanigans so anybody can do it really. Just set the printer as having two extruders (image is from SuperSlicer):
Then I copied the M600 macro from the official GitHub macro repository for Voron (https://github.com/Klipper3d/klipper/blob/master/config/sample-macros.cfg)
Just make sure to edit out in the gcode the parts where it makes two tool changes to prime them, it is completely useless for our use case.
To export it, first edit the f3d file and change the sketch text to whatever is your serial N.
Then you will have many bodies, export the project as a mesh:
And you will now have a single m3f file with all the bodies. Importing in SS you should get a prompt like this:
Just say yes and then assign the extruder to each part. I recommend going with 1st extruder being the accent color (the text) and second extruder the rest.
If the fit is not perfect add some tape or sand, depending on the needs.
Hope you like it!