SolidCore CoreXY Gantry
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the gantry and carriage design for the SolidCore CoreXY printer.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 175
- Wydruki
- 0
- Wyświetlenia
- 3708
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SolidCore CoreXY Gantry
This is the gantry and carriage design for the SolidCore CoreXY printer.
see Hackaday 3D Printer Project
Gantry Design
The SolidCore Printer design currently uses a bowden tube setup to allow for higher acceleration but a direct drive extruder soon be added to allow for higher feedrate.
Aluminum Gantry / Carriage
Although the design is uses all metal parts, the carriage and gantry are designed to be light weight and strong. We currently use c-shaped aluminum stock because it reduces machining time. The reduced machining time and minimized waste helps but it’s a compromise will most likely change soon as the y-axis linear rail will be reoriented into the a vertical position similar to the RailCore. The SolidCore uses this mechanical arrangement will so it's easier to adapt an E3D Toolchanger.
X-Carriage Parts List
- 2 x Carriages
- 2 x MGN12H Rail Clamps
- 2 x GT2 Toothed Idlers
- 2 x GT2 Smooth Idlers
- 4 x M5 x 35mm Long Button Head Cap Screw
- 8 x M3 x 6mm Long Button Head Cap Screw
- 12 x M5 Steel Washers 1mm Thick
- 8 x M5 Nylon Washers
- 2 x GT2 Idlers
- 4 x 10.5mm Pulley Spacers
X-Carriage Idler Pulley Assembly & Installation
X-Carriage Assembly Diagram
Y-Carriage / Extruder Carriage
For More Information see SolidCore BOM