Anti vibration feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print anti vibration feet for 3D-printers and other machines. Fits outside/under the existing feet.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 472
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Easy to print anti vibration feet for 3D-printers and other machines. These are made to fit outside/under the existing feet on the Artillery SideWinder X2. Should fit the X1 and Genius as well. And also probably a bunch of other printers. Print in TPU 3 walls ,3 top/bottom and 7% gyroid infill. If you use more infill you will loose some of the dampening effect. I had to go up to 250 degrees celcius before it printed ok without under-extrusion, but your filament and hot-end might be different. Be careful with high temperatures if you don't have an all metal hot-end. (because of toxic fumes from PTFE tubing) Happy printing!
Print Settings
Printer:
Custom SwX2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
any
Infill:
5-15%
Filament:
any TPU
must be red!!
Notes:
About 7mm effective vibration dampening, decrease the Z height if it is to much, or use more infill to make them stiffer.
Category: 3D Printer Parts