Anti vibration feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print anti vibration feet for 3D-printers and other machines. Fits outside/under the existing feet.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 79
- Makes
- 0
- Views
- 475
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Easy to print anti vibration feet for 3D-printers and other machines. These are made to fit outside/under the existing feet on the Artillery SideWinder X2. Should fit the X1 and Genius as well. And also probably a bunch of other printers. Print in TPU 3 walls ,3 top/bottom and 7% gyroid infill. If you use more infill you will loose some of the dampening effect. I had to go up to 250 degrees celcius before it printed ok without under-extrusion, but your filament and hot-end might be different. Be careful with high temperatures if you don't have an all metal hot-end. (because of toxic fumes from PTFE tubing) Happy printing!
Print Settings
Printer:
Custom SwX2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
any
Infill:
5-15%
Filament:
any TPU
must be red!!
Notes:
About 7mm effective vibration dampening, decrease the Z height if it is to much, or use more infill to make them stiffer.
Category: 3D Printer Parts