Hitachi Compound Miter Saw Side Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an alternative design to Replacement Adjustment handle for Hitachi Compound Miter saw. Fits model C10FCG + more
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 238
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Alternative Design Side Handle For Hitachi C10FCG Compound Miter Saw.
May also Fit: C12LSH, C12RSH, C10FSB, C10FSH, C8FB2, C8FSE, C8FSHE.
I bought an open box special some years ago and was missing the handle among a few other things.
Had the bolt but no handle. Got a printer and staring to learn design so I decided what a great project to learn on.
Unfortunately I have no idea what size or thread of bolt you'll need. Only thing I know is this one is 32mm thread length. The bolt is a press fit. I put the handle in the vise and used a 3/4 " drive ratchet extension to tap/persuade it in.
I printed it on an a Sovol SV02 with Creality Ender Series Black PLA
I used
.2 Layer height
.5 line width
3mm walls
1.0 mm top/bottom layers
6 top skins
15% gyroid infill
no supports when printed as designed with knob up.
I used a brim to stabilize, enabled acceleration and jerk control plus slowed it down a little because it is top heavy.
Hope this helps someone.