Hitachi Compound Miter Saw Side Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an alternative design to Replacement Adjustment handle for Hitachi Compound Miter saw. Fits model C10FCG + more
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 39
- Makes
- 1
- Views
- 238
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Alternative Design Side Handle For Hitachi C10FCG Compound Miter Saw.
May also Fit: C12LSH, C12RSH, C10FSB, C10FSH, C8FB2, C8FSE, C8FSHE.
I bought an open box special some years ago and was missing the handle among a few other things.
Had the bolt but no handle. Got a printer and staring to learn design so I decided what a great project to learn on.
Unfortunately I have no idea what size or thread of bolt you'll need. Only thing I know is this one is 32mm thread length. The bolt is a press fit. I put the handle in the vise and used a 3/4 " drive ratchet extension to tap/persuade it in.
I printed it on an a Sovol SV02 with Creality Ender Series Black PLA
I used
.2 Layer height
.5 line width
3mm walls
1.0 mm top/bottom layers
6 top skins
15% gyroid infill
no supports when printed as designed with knob up.
I used a brim to stabilize, enabled acceleration and jerk control plus slowed it down a little because it is top heavy.
Hope this helps someone.