AD5M/PRO indicator holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Indicator holder that replaces the toolhead front cover of the Adventurer 5M or AD5M Pro
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 116
- Wydruki
- 1
- Wyświetlenia
- 1461
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
Indicator holder that replaces the toolhead front cover of the Flashforge Adventurer 5M or AD5M Pro. Fits 2in face dial indicators that have 3/8" Diameter rods. I have test fit it but I don't have the 5x2mm magnets yet so keep that in mind. To install, remove the toolhead front cover, disconnect the part cooling fan and attach the indicator and holder assembly to the toolhead the same way as the tool head cover. If the indicator has a mount on the back plate then it may need to be removed. Watch clearance to the frame when moving to the front of the print area.
Hardware:
-4ea M3x5mm hex head cap screws
-4ea M3 nuts
-2ea 5x2mm magnets
Note: This may not fit all 2in face indicators due to the varying face adjustment clamp location.